What do to with stock engine after swap.
 

I'm definetly going to do the rsx swap as soon as hasport comes out with the mounts and stuff.
As for my current engine...what should I do with it? Try selling the whole thing? Sell the parts
privately or on ebay? Put a 100 shot of NOS on it and head to some races? Anyways...any
suggestions would be great. Oh yeah...also have the Injen CAI. Will be selling it as well.

i have a rsx-s and a civic lx and i was just wondering what swap you are going to do it with the b18c or k20c

Hell, if you're planning on blowing up your stock engine, you might as well go with a 10000000000 shot of nitrous and blow everyone away. Seriously though, I'm not sure, I've never been involved in an engine swap. I'm sure others will have a legitimate answer for you.

I'm going with the type-s engine into my 2k1 civic lx. I didn't know that any B series motor fit into our bays
so I left that option out of the question. Anybody have an idea if the prelude H22 will fit?

b18c is the base model rsx-s i think this is the only b series that will fit and the h series will not fit without HEAVY mods to it but it can be done look at the aem 2k1 civic it has h22 swap

That doesn't make any sence. Acura.com says both engines are 2.0 liters. and i-vtec. The only honda engine out with i-vtec is the k20...granted there are minor differences. The new Si, the rsx, and the rsx all have the k20 in them. However even the regular rsx have about 10 more torque than the Si. And the only differences between the regular and type-s rsx are the following.
11:1 compression ratio (can be achieved with racing pistons I believ )
slightly better valve timing (better cams? or rockers?)
A better intake. (But still nothing like what you'd buy on the aftermarket)
A better exhaust. (Again. Might as well get a GReddy Evo.)
6-speed tranny (A must have)
If you're looking to save some money during the swap try finding the
regular rsx engine and get the 6-speed and do the mods like the pistons, intake, exhaust, and cams.
This should bring you within range or most likely more HP than the type-s engine.

the b18c and its various iterations are the motors used in GS-R and type-R integras. the reason the regular RSX has more torque than the si hatch is because the gears are different. well, if and when you do the swap, be sure to keep us posted [IMG]i/expressions/face-icon-small-tongue.gif[/IMG]

hate to break it to you.....but the RSX motors are all K series....not B

RSX-S: K20A
RSX: K20A3
Civic Si: K20A3
My Civic Ex: D17A2 [IMG]i/expressions/face-icon-small-sad.gif[/IMG]

Thanks for backing that up Pounds.
And as for the swap I just gotta wait for HASport to make the mounts and such
Read this thread for more info.
http://www.2k1civic.com/forum/messageview.cfm?catid=2&threadid=40726

This is relatively easy, sell it on eBay (I suggest local pick-up only if you don't want the huge hassle of shipping and shipping prices), if you need or want the extra money for whatever turns you on! If you don't need or want the money for whatever then NOS all the way!!! Jus be safe and have fun wit it if you choose the second route!!! Good Luck!!! Put the Injen CAI up on eBay!

[IMG]i/expressions/face-icon-small-wink.gif[/IMG]

Flick it into a GEO Metro, throw Nitrious on there and go take out some Mustangs. . Would be funny . . Make sure to record the expression on their faces..

....I guess I might be a little strange but I keep all my OEM parts when I get aftermarket stuff installed, so I would probably just stow it in my garage, but if i found a buyer for a g or 2 i might consider letting it go, i would not blow it with nitrous.

nah, you're not a little strange, i do the same thing. i just do it so that in the unlikely event that either something goes super wrong or i sell the car, i can put them all back on.

Build it up and sell it.........[IMG]i/expressions/beer_yum.gif[/IMG] Put pepsi in the oil for shits and giggles[IMG]i/expressions/laugh2.gif[/IMG]

You guys r´so luchy living in the states, but for me neither the swap or turbo is an option to much money and no shops that would dream of doing that here in Mexico.......... [IMG]i/expressions/face-icon-small-disgusted.gif[/IMG][IMG]i/expressions/face-icon-small-sad.gif[/IMG]

Wait a minute.......I thought you had an RSX-S? You don't even know the engine code when it's printed right there on your engine?:susp:

I know so sad, i wish we would get the SI or RSX here in Mexico I know the engine codes...... :cry: :cry::cry::cry:

Yeah...maybe the two of you are right. I've always wanted to tear down and rebuild an engine.
Maybe I'll just do it with my civic lx engine. Who knows...only time will tell...thanks for the replys.