D17 engines and stage 2
 

i read in the forums about people who had a D17 stage 2 option and they said it was like 3000 dollars or so to do but i cant find that thread anywhere. anybody know what it was?

methinks you are speaking of the gude package, try searching "gude"

you guys might want to check this company out before spending your money.. Gude might be the way to go.. but this guy helped with my integra LS.. this is an e-mail he sent in reply to some questions i had.
D17 Stage 2 Engine:
Pistons and balancing – 500.00
Crank Knife Edged Lightened and Balanced – 350.00
Stage 2 Cylinder Head: Port, Polish, Race Cut Valves, complete remanufactured head including seals – 800.00
Nitrided Stainless Valves w/ narrowed stems – 300.00
Reworked High Pressure Oil Pump – 100.00
Main Bearings and Rod Bearings – 400.00
Gaskets: Head, bottom end and misc. – 200.00
Assembly (including but not limited to beam polishing and shot penning of rods, timing belt and water pump)– 1075.00
Lightened and balanced flywheel – free!
Engine Development Total – $3725.00

This engine would build at least 50% gain over the stock.

The individual throttle bodies will cost alot. This would run at least 1000. We dont have exact figures on what kind of power gains these would bring, however we are quite sure it would make a significant difference. The easiest way to do this would be to run a Haltech or Motec engine management system as the probably carry these. You would run individual air filters for we could build an air box.

I am not sure who has rods for a stroker appliction. If nobody makes them they will have to be made.

Included is a loose estimate not including dyno tuning time.

If you could give us an estimate of how much you want to spend we can design a package to get the most power possible out of your money.

Thank you for your interest,

John Kauffman
KMS Engine Development
770.652.3538

i talked to John again yesterday and i told him i was willing to spend 4 to 5 grand and he said he could put me at 250-260hp at the crank. not bad numbers when you compare the price and the results of a turbo. all motor is the way to go. and those sidedraft individual throttle bodies are sssuuuuuuuhhhhwwwweeett!!!!!

hey boost, is this guy family or something?
you keep boosting about him :)

i know i know...that was cheeezy, im just tired brain dead right now, too much studying! :tdown:


RF Bwoy

thats crazy, post more info as soon you get it, let us know. Like to know a little more about KMS, thanks

i own a shop here in Houston and we trade business back 'n forth when needed. and personally it just looks a lot better than what gude has to offer... if you don't have much to spend then i see how going with gude is a good idea.. after all his cams are nice. try their website... www.kms.com

thanks boost, i'll check it out!


RF Bwoy[IMG]i/expressions/beer_yum.gif[/IMG]

<< i talked to John again yesterday and i told him i was willing to spend 4 to 5 grand and he said he could put me at 250-260hp at the crank. not bad numbers when you compare the price and the results of a turbo. all motor is the way to go. and those sidedraft individual throttle bodies are sssuuuuuuuhhhhwwwweeett!!!!! >>




Hahahahahaha, hahahahahaha, hahahahahahaha, you think your gonna get 250-260hp all motor from your D17A!!! hahahahaha, ahahahaha, you will be spending alot more that $4k buddy, it would probably be $2k just for dyno tuning such a experimental setup. Oh ya, and did I mention SOHC!!! hahaha!!! Sorry for laughing so much, but I hope this gives you motivation to prove me wrong and spend $10,000 on a $15000 car!! hahahaha!!

Can you please tell me why you guys in canada call the 7th gen civic EX an SI? It's hardly an Si.[IMG]i/expressions/face-icon-small-disgusted.gif[/IMG]

the reason they call it the si is bc that is there badging on there car u newbie. the si here in america is the sir in canada.

Is this emission and smog legal?


HAHAHAAHAHAHAHAAHAHHAHAHAAHAHAHUH????????????????

actually, no it's not carb legal at all... i know most people would call the laughing thing flaming.. if it's not possible, that's cool... doesn't really bother me all that much.. but enjoy the thread! hahaha. and, so ya know people laughed 10 years ago at a thought of a 12 second civic in the first place..

and yeah that's far fetched for sohc.. these aren't b-series engines... i know.. but they can go further than a lot of you say...

black2k1vtec, You've been here almost as long as I have. I'm surprised that you were so eager to flame the guy for getting info from someone else, I mean, no ones really done anything major to this engine yet, so how do we(you, me, anyone) know what it is capable of. and he if says he can get it done for 5,000 then hell, I believe him. thats all I have to say, later- joe

all i know is that the guy that runs the place has been in the game longer than me... he has a machine shop.. i'm just in the retail end.. this is the same guy that has put a nsx drivetrain in a crx. (it's on his website if you need proof!) anyway, i'm not bothered or affected in anyway by peoples responses on this site.. i'm just sharing info that i get.

I am interested, but the link Boost gave sends me to a financal service company. Can someone help?

the website is www.honda-performance.com sorry that was my mistake.

which shop do you own in houston?

Infinite Performance- We're actually on the north side in The Woodlands. we are in the process of getting our building up, but if you need anything contact me.
i'll be happy to help you out with advise or parts.. and in some cases even installs. My prices are extra low until august when my actual store opens.
281.813.2874
--free shipping--
AEM
DcSports
HpRacing
Apexi
Enkei
Thermal R&D (the list goes on...)

hey BOOST, post your email so we can get part quotes form ya etc, so we can help you, and you us :tup:

Cool good to know of another store although i live in the city. When you open the store will it just be retail or installing as well?

hey Linger, Jr. member, NooB...do some searchage before posting man!

RF Bwoy

I'm starting to sweat from all this

<< Infinite Performance- We're actually on the north side in The Woodlands. we are in the process of getting our building up, but if you need anything contact me.
i'll be happy to help you out with advise or parts.. and in some cases even installs. My prices are extra low until august when my actual store opens.
281.813.2874
--free shipping--
AEM
DcSports
HpRacing
Apexi
Enkei
Thermal R&D (the list goes on...) >>



You have Konig on that list?

my e-mail is Infinite02@yahoo.com
or call me at 281.296.8250

i can probably get Konigs too...

Jackson Racing
Dc Sports
AEM
Ingalls
Thermal R&D
Sparco
OZ
Enkei
Antera
Team Dynamics
Hp Racing
Apexi
ACT

Yes we'll be installing.. and in some cases even now i might be able to hook you up with an install... and paintjobs as well.