Honda Civic Forum

Honda Civic Forum (https://www.civicforums.com/forums/)
-   Parts and Products (https://www.civicforums.com/forums/2-parts-products)
-   -   fog lights - same for sedan and coupe or different? (https://www.civicforums.com/forums/2-parts-products/22810-fog-lights-same-sedan-coupe-different.html)

Diznavis 02-04-2002 07:26 AM

fog lights - same for sedan and coupe or different?
 
i have some time on my hands today and i would like to go to the dealer and try to exchange the fog light kit i got from handa-accessories.com since they sent the sedan kit instead of the coupe kit. i would like to know if the lights themselves are different or if i can keep them and just exchange the wiring harness and switch. please respond ASAP so i have time to deal with this today. itll probably be easier to come up with a good story for getting them to exchange just the wiring and switch rather than the whole kit.

GTekCiViC 02-04-2002 08:55 AM

just get them to install it for you........ dealer installation are the best

Diznavis 02-04-2002 09:00 AM

dealer installation = serious $$$$, i got them from handa-accessories.com to save money. im probably gonna get someone to cut the bumper and mount the lights for me, but i want to do the wiring myself

Diznavis 02-04-2002 11:27 AM

well i went to 2 different dealers and neither of them stocked the fog lights or the switch. but at the first dealer i was told that the kits are the same except for the switch

Eman 02-04-2002 12:04 PM

Hey, I received the correct fog light kit for my car from HandA. The lights are the same except for the switch harness. I have the part number for the 02 kit if you'd like to be sure.

I would say that installking the kit is very straight forward, the hardest part is routing the wiring harness because of the space in the engine compartment and under the dash. The instructions says to use a hack saw to cut the bumper off, I just used a very sharp box cutter and it did the job. Be careful with the driver side because the horn and the horn harness is directly behing the plastic piece you are cutting.

Good luck


All times are GMT -5. The time now is 02:12 AM.


© 2024 MH Sub I, LLC dba Internet Brands