*solved* Interior LED Lighting Just bought myself a 2 Position Toggle 15 Amp switch and a dual LED strip light for car interiors. I know where I want everything but I am not sure how to set it up... The lights have 2 sets of black and black-white wires. And obviously the switch has an off and on connector. Any one ever done this before? I just want to be able to turn the interior lights on/off while the car is running. Thanks:) |
Re: Interior LED Lighting The light should have come with a diagram or something telling you what the wires are. One should be + and the other - hook + to 12v source. Run neg from led to switch then from switch to ground. |
Re: Interior LED Lighting
Originally Posted by GolNat
(Post 4629566)
The light should have come with a diagram or something telling you what the wires are. One should be + and the other - hook + to 12v source. Run neg from led to switch then from switch to ground. I ran a the power wire from the cigarette lighter fuse to one end of the switch. Then I attached the power wires for the lights to the other end of the switch. And the ground from the lights to bolts attached to the frame. Hid all the wires and turned it on. Light! :fullofwin: |
All times are GMT -5. The time now is 09:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands