Honda Civic Forum

Honda Civic Forum (https://www.civicforums.com/forums/)
-   Wheels and Tires (https://www.civicforums.com/forums/189-wheels-tires)
-   -   Fender Roller (https://www.civicforums.com/forums/189-wheels-tires/311443-fender-roller.html)

civicRICER 10-18-2008 08:50 PM

Fender Roller
 
need to roll my back fenders but dont have money to buy fender rollerrr. anyone have one for rent??

TRIZ 10-18-2008 09:07 PM

Re: Fender Roller
 
You should hit up autzone, baxter, napa, etc type of places. A lot of times they have all the random tools you'll need only once, and you can rent them.

civicRICER 10-18-2008 10:05 PM

Re: Fender Roller
 
ive tried the autozones and napas around my area. i'll try Baxter's. thanks bro

TRIZ 10-18-2008 11:46 PM

Re: Fender Roller
 
Autozone is where I rent all of my tools from. Wait... your in portland too?

civicRICER 10-19-2008 03:41 PM

Re: Fender Roller
 
ya i live in gresham. you know what autozone rents them?

TRIZ 10-19-2008 07:03 PM

Re: Fender Roller
 
The autozone in aloha/ hillsboro is where I usually go to get tools, or one of the shops on Cedar Hills road right across from the Winco there. I'm not sure specifically about a fender roller though, but they do have a huge list of tools. Usually all you have to do is put 50 bucks down for a deposit and then you get it back when the tool is returned. I'm sure all autozones are pretty much the same- give a few calls.

chinaman516 10-20-2008 09:33 AM

Re: Fender Roller
 
No napa and autozone will not have this tool. It is you can however rent it online. it is a 250 deposit with a 50 rental fee.

http://www.rollyourfender.com/

Alot of guys over at the IS forums went through this website to rent.

BUN

DeX 10-20-2008 10:00 AM

Re: Fender Roller
 
Just use a bat.

chinaman516 10-20-2008 11:05 AM

Re: Fender Roller
 
Bats chip paint

ajhdragon 10-20-2008 03:13 PM

Re: Fender Roller
 
Ive used a bat many of times, never chipped the paint. get a cheap bat, cost it in rubber (might run you $5) and your never have to worry about it.

TRIZ 10-20-2008 08:17 PM

Re: Fender Roller
 
I'm sure speedconcept on TV highway will have one of these that they can do it for you. There are also a lot of other shops, RRev and Horsepowerfreaks that might have this tool in their shop too.

civicRICER 10-20-2008 08:23 PM

Re: Fender Roller
 
good idea i'll try a tuner shop around here


All times are GMT -5. The time now is 07:55 AM.


© 2024 MH Sub I, LLC dba Internet Brands