EX coupe FOB Factory?? 1 Attachment(s) Just got this car, its a 2001 civic EX coupe found an "extra" wire while doing a quick pre purchase inspection, otherwise all stock. I now think the wire is to a alarm system. I've searched a good bit on youtube, but do not see the remote fob that I was given with the car. I have 2 keys, one ILCO for the ignition, and a strattec for the doors the fob in the photo takes 2, CR2016's Question: Is this an OEM FOB ?? will I be able get a 2nd ignition key made at a non dealer key shop?? Thanks Sorry if I missed the answer in a prior post |
Re: EX coupe FOB Factory?? Fob is not from Honda. An EX would have been equipped at the factory with keyless entry. As for keys, you would need a correct key and it needs to be programmed to the car (immobilizer) if the blank can't be "cloned". Inquire with your key seller before attempting. |
Re: EX coupe FOB Factory?? Thank you Sir |
Re: EX coupe FOB Factory?? Factory fob would have been this style (may or may not have the trunk button) http://ecx.images-amazon.com/images/...kL._SY300_.jpg |
Re: EX coupe FOB Factory?? The factory fob I received when I first got my 02 looked much like this one http://vitsathrough.com/images/image...rch=B0097CES0U It broke a long while ago and replaced it with the one that ezone posted up |
Re: EX coupe FOB Factory??
Originally Posted by ezone
(Post 4693578)
Factory fob would have been this style (may or may not have the trunk button) http://ecx.images-amazon.com/images/...kL._SY300_.jpg |
Re: EX coupe FOB Factory?? Thanks for the replys guys! as a follow up My locksmith noted that the door, and ignition keys have different cuts. Is this standard for Honda? Or has one of the locks been rekeyed?? THANKS @ezone;
Originally Posted by ezone
(Post 4693575)
Fob is not from Honda. An EX would have been equipped at the factory with keyless entry. As for keys, you would need a correct key and it needs to be programmed to the car (immobilizer) if the blank can't be "cloned". Inquire with your key seller before attempting. |
Re: EX coupe FOB Factory?? As far as I know, door and ignition should use the same key |
Re: EX coupe FOB Factory??
Originally Posted by meicalnissyen
(Post 4693851)
My locksmith noted that the door, and ignition keys have different cuts. Is this standard for Honda? Or has one of the locks been rekeyed?? (I would like to believe that) anyone with enough brain cells and lock tumblers to rekey a lock would make them all use the same key. |
Re: EX coupe FOB Factory?? Oh yeah, I knew, I just had no reason to have an opinion until locksmith asked if that was normal Both are aftermarket keys, but the ign has more wear I put batteries in the fob (omega 4415) and it does nothing. dunno if its lost its programming, or if it just was for the alarm I noticed underhood
Originally Posted by ezone
(Post 4693857)
You already knew this, yes? NO. No, more like whichever lock is the oddball got replaced. (I would like to believe that) anyone with enough brain cells and lock tumblers to rekey a lock would make them all use the same key. Now I have to search for a how to on the FOB prog, that at least was easy on the speed, hoping the honda as well THANKS |
Re: EX coupe FOB Factory?? key off to on 4 times with a fob lock press each time Easy |
Re: EX coupe FOB Factory?? If you are trying to program that non-factory fob, you need to find the alarm (or remote start) control unit and google that manufacturer, see if you can get some instructions for it. If you have obtained a correct Honda fob, that's a piece of cake to program yourself....assuming nobody screwed with it when they installed aftermarket stuff. |
All times are GMT -5. The time now is 11:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands