Stafford Fabrication Turbo Kit now for sale!!! 2 Days Left!!!
Thread Starter
Former Sponsor
iTrader: (4)
Joined: Mar 2003
Posts: 152
Likes: 0
From: lancaster, California, US
Rep Power: 0 
Stafford Fabrication Turbo Kit now for sale!!! Please read 1st post
The Stafford Fabrication Turbo Kit for the 2001-2003 Civic is now available.
The current price for members of this site is $2900 plus shipping. S & H is $90 to everyone in the US (except HI) All others please email your address to us for shipping quote.
the kit consist of
t-3 turbo
custom tubular manifold
intercooler (19x9x2 3/4)
intercooler piping 2 1/4"(powerd coated)
couplers&clamps
turbo xs bov
oil lines
air intake
APC high flow filter
down pipe 2 1/2"
fuel system -proven passed 10psi(not recomended)
map sensor isolation valve
You can see pics of the kits being installed on the DIY thread in the Forced Induction forum
feel free to ask any questions you might have and I will try to answer them every night
you can PM me on this site or you can email me at staffordfabrication@yahoo.com or just give me a call at 661 816 5444
Thank you for your support
The current price for members of this site is $2900 plus shipping. S & H is $90 to everyone in the US (except HI) All others please email your address to us for shipping quote.
the kit consist of
t-3 turbo
custom tubular manifold
intercooler (19x9x2 3/4)
intercooler piping 2 1/4"(powerd coated)
couplers&clamps
turbo xs bov
oil lines
air intake
APC high flow filter
down pipe 2 1/2"
fuel system -proven passed 10psi(not recomended)
map sensor isolation valve
You can see pics of the kits being installed on the DIY thread in the Forced Induction forum
feel free to ask any questions you might have and I will try to answer them every night
you can PM me on this site or you can email me at staffordfabrication@yahoo.com or just give me a call at 661 816 5444
Thank you for your support
Last edited by SFpower; Jul 28, 2003 at 12:31 PM.
lol 
Thread Starter
Former Sponsor
iTrader: (4)
Joined: Mar 2003
Posts: 152
Likes: 0
From: lancaster, California, US
Rep Power: 0 the kit is not currently c.a.r.b. legal. however if the response is good and I sell a fair amount of these kits I will aply for a carb exempt sticker and it will be retro active for all former buyers
the kit at 6.5 lbs put 165hp &166tq to the ground on a lx w/ stock exh.
if your willing to drive to lancaster i'll put the kit in for 100.00 bucks & lunch
for those of you who want to get your hand dirty the kit go in fairly quick about 3 to 4 hours
as far as buying parts seperate sure everthing but the fuel system. That only comes w/ the kit for now
the kit at 6.5 lbs put 165hp &166tq to the ground on a lx w/ stock exh.
if your willing to drive to lancaster i'll put the kit in for 100.00 bucks & lunch
for those of you who want to get your hand dirty the kit go in fairly quick about 3 to 4 hours
as far as buying parts seperate sure everthing but the fuel system. That only comes w/ the kit for now
Registered!!
iTrader: (2)
Joined: Mar 2003
Posts: 3,071
Likes: 0
From: Lancaster, California, US
Rep Power: 312 Sorry, here are some pictures
If those dont work, go here
http://www.clubcivic.com/board/album_pic.php?pic_id=436
http://www.clubcivic.com/board/album_pic.php?pic_id=434
http://www.clubcivic.com/board/album_pic.php?pic_id=433
If those dont work, go here
http://www.clubcivic.com/board/album_pic.php?pic_id=436
http://www.clubcivic.com/board/album_pic.php?pic_id=434
http://www.clubcivic.com/board/album_pic.php?pic_id=433
what about my questions?? 
Registered!!
iTrader: (5)
Joined: Jun 2002
Posts: 772
Likes: 0
From: Springfield, Ohio, US
Rep Power: 0 and that would mean ex people can never return to stock...hmm...oh well...i got a good deal on my ex cat anyway didn't i 
....ok where do i send my money? and when can i expect to have it here
oh one thing about cuttin the ex downpipe/cat is that the hole for the o2 sensor is *just* below the flange...where u have your sensors at catalyst? is there a spot on the downpipe that comes with the kit for at least the primary one?
....ok where do i send my money? and when can i expect to have it hereoh one thing about cuttin the ex downpipe/cat is that the hole for the o2 sensor is *just* below the flange...where u have your sensors at catalyst? is there a spot on the downpipe that comes with the kit for at least the primary one?
Last edited by ohmysac; May 13, 2003 at 12:51 PM.
Thread Starter
Former Sponsor
iTrader: (4)
Joined: Mar 2003
Posts: 152
Likes: 0
From: lancaster, California, US
Rep Power: 0 the o2 boss for the primary is in the down pipe
I will be accepting payment as soon as their are five of you right now I think theres three two to go and Ill order parts for five kits it will take about ten days to order,recieve, build, and in the mail
about the hx i've got no clue but if you want a turbo i'll make it fit!
I will be accepting payment as soon as their are five of you right now I think theres three two to go and Ill order parts for five kits it will take about ten days to order,recieve, build, and in the mail
about the hx i've got no clue but if you want a turbo i'll make it fit!
Retired - SoCal FI Mod
iTrader: (4)
Joined: Jan 2002
Posts: 3,139
Likes: 0
From: Boston, MA
Rep Power: 0 all your questions are answered in this thread:
http://www.7thgencivic.com/forums/sh...threadid=87814
please search...
http://www.7thgencivic.com/forums/sh...threadid=87814
please search...
