Kaminari Kit finally on
Thread Starter
Registered!!
iTrader: (2)
Joined: Apr 2002
Posts: 640
Likes: 0
From: , Connecticut, US
Rep Power: 0 
Kaminari Kit finally on
Check out my car...kit is FINALLY on. I've decided not to put my camber, goldline, and koni's on until the Spring (so I'm not a snow plow).
A1 lower grill is going on tommorrow...its hard to see, but the mirrors match my black to silver tints....
My Ride
Matt
A1 lower grill is going on tommorrow...its hard to see, but the mirrors match my black to silver tints....
My Ride
Matt
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Sweet... How did you end up getting everything on? Did you do the rest yourself, or did a bodyshop do it? What about the clips in the front? Did you end up buying something for that? I know I saw something you could use at Lowe's. What about the front gap? Did the bodyshop fill that in for you? Looks good BTW. Did you end up using the hardware that we bought and in the locations we talked about?
Registered!!
Joined: Nov 2001
Posts: 1,062
Likes: 0
From: Markham, Ontario, Canada
Rep Power: 0 Car looks clean man. Good stuff, keep up the good work 
[IMG]i/expressions/beer_yum.gif[/IMG]
I don't know why, but your rims look small to me. Maybe its the tires? Anyways you shoudl get some aftermarket white bulbs. That would complete the night time look. I don't like the stock bulbs, too orangey.
[IMG]i/expressions/beer_yum.gif[/IMG]I don't know why, but your rims look small to me. Maybe its the tires? Anyways you shoudl get some aftermarket white bulbs. That would complete the night time look. I don't like the stock bulbs, too orangey.
Thread Starter
Registered!!
iTrader: (2)
Joined: Apr 2002
Posts: 640
Likes: 0
From: , Connecticut, US
Rep Power: 0 Grey,
I'm doing the self tapping screws into the bottoms of the sides when I jack up the car next time. I did the back like the front. When I put the front on the 2nd time, it matched up perfectly...dunno what was a little off when we did it. I still haven't done anything with the underside of the front...but I plan on taking care of that soon.
My tires look small because they are 215/40/17s and I haven't lowered the car yet. The rims are 17"s...kinda wish I got 18"s though.
Matt
I'm doing the self tapping screws into the bottoms of the sides when I jack up the car next time. I did the back like the front. When I put the front on the 2nd time, it matched up perfectly...dunno what was a little off when we did it. I still haven't done anything with the underside of the front...but I plan on taking care of that soon.
My tires look small because they are 215/40/17s and I haven't lowered the car yet. The rims are 17"s...kinda wish I got 18"s though.
Matt
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Hehe, that's hella weird. I hope the holes underneath didn't misalign because of the shrinkage... I'm telling you though, Lowe's! They have the clips you need. The long plastic push in ones. Much less than the OEM ones. Well, even the long OEM ones didn't really seem to fit.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
robjcivic
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
Mar 12, 2017 12:10 PM
JetsterDajet
Mechanical Problems/Vehicle Issues and Fix-it Forum
52
May 8, 2016 12:11 AM
