Rep Power: 414

Who's up for it???? We already have interest from Me, Grey, Blk4blk, and Krepoort.......... Who else wants to show????

Duane will be installing his horns (again), I'll be doing a major sticker install (it will add 40hp...), and Krepoort is looking to fix his fogs....

How about the CT chickies?? Maybe you can actually get out the car... [IMG]i/expressions/face-icon-small-tongue.gif[/IMG] Any newbies want to join us??? How about any peeps we have met in the past want to come meet with us again??? Let's get a bunch of people together!!!!

Anyone else have anything to install?????????????????????? Grey's got all da tools, yo.....

Here, I'll start a list:
1. KingPimpCivic = Havok2k1 (bringing hot dogs and rolls)
2. The Greyness (the hostest w/ the mostest)
3. TrooperK, I mean Krepoort (Vegan stuff and???)
4. DDogg = Blk4Blk (Soda & Burgers?)
5. Pill = TwilightXXX (Sodas)
6. Hjteq, ASC Bumper Repair (???)
7. Nytejade (???)
8. noname = umm, well, noname! (???)
9. Lowtek and g/f (Chicken stuff said by Grey?)
x10. Sovereign (sp?) (???)
11. Quickofftheline (her hawt body)
12. Sivikchik, because she lubs me (Buns, Hamburg buns that is...)
13-327. ????????


x denotes a "maybe...."

 
Rep Power: 389

Dat shiznit be tizight yo! Ma shiz won't take long cuz I gotz ta only swap the blow thang yo!!


Translation: That sounds good to me. Mine shouldn't take long becaause I only have to replace the compressor, no wiring issues..

 
Rep Power: 420

So yeah, my place again? [IMG]i/expressions/laugh2.gif[/IMG]
Allright, sounds good to me. I might have something to install if I can get some help.
My battery terminals. It's hard to get the stock ones off without damaging them, so if anyone has any ideas then I'de appreciate the help. [IMG]i/expressions/face-icon-small-cool.gif[/IMG]

Um... What else? Hmm... I think that's it for me, although I might need to install my front camber kit. That is if someone has any good ideas on how to adjust the camber so that it's just like stock! Yeah, that's all folks.

Come one, come all. There may be beer. Shh! Don't tell anyone. [IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 0

Hey, does anyone have anything to get rid of license plate rattle? I'm also gonna bring my soldering kit. I've been meaning to solder the connection from my gauges to my parking lights together instead of the electrical tape on there now.

 
Rep Power: 0

Hey,

After tommorrow Grey, you'll have a few extra bones to spend cuz your help will not go unnoticed. Maybe if I have time, I'll take a ride up to show you guys my finished ride...by the end of next week I'll have added to my car:

Kaminari Full Lip Kit (Painted as well)
Apex-I N1 Style Exhaust
Goldline Springs
SPC Camber Kit
Power M3 Mirrors (painted chrome)
Probably Full DC Bars...
Just put on my DC Headers
Custom 2.5" Full Cat Back
Custom Downpipe w/change over

All going on starting tommorrow at Grey's house...finished Friday with paintjob at Turnpike Motors on Friday. WHOOT. Next Project; INSIDE of CAR and Trunk!

Whoops, under my brother's name still...this is sovereign82 [IMG]i/expressions/face-icon-small-smile.gif[/IMG].

Matt

 
Rep Power: 420

Krepoort: Maybe I do... Do you have a license plate frame? If it's not designed to work with two holes, then there's your problem.

sovereign82: Wow, you're really hooking that thing up. Some cha-ching would be much appreciated. Surely. [IMG]i/expressions/face-icon-small-smile.gif[/IMG]

 
Rep Power: 0

I am interested in going here is my email hjteq@2k1civic.com
All I want to install is... nothing just looking forward to learning and maybe fixing my rear bumper...

 
Rep Power: 420

Yeah, definately dude. Just keep on keeping on. You know, just read this thread once in a while to get the latest news on what's happening with this meet. Fixing your rear bumper, eh? Like what? What's wrong with it? [IMG]i/expressions/face-icon-small-confused.gif[/IMG]

 
Rep Power: 0

You know I'm there...

w00t w00t!

Let's get some food action too...what can I bring, mighty Greyness?

 
Rep Power: 0

Yeah, I have a 4 hole frame. I just need something to put behind it so the edges dont rattle against the trunk when I close it.

And I got another project now. My gauges went out last night. Was driving home from girl's place and just blinked out. Then they came back on like 10 minutes later for like a minute then went off again. Hopefully its just the connection. I'll wait till Sun to crack it open and look.

 
Rep Power: 389

I'm still in, although won't be able to make until after 1pm or so... Got my compressor ready to roll, and I'm thinkin of grabbin some Dynamat for my liscense (sp?) plate frame.

 
Rep Power: 0

what time is this all going down at. cuz once again my girl works on sundays and i would have to bouce to go pick her up

 
Rep Power: 420

TwilightX: Hmm... Food? Um... How about we do the BBQ thing again? That always works out well. Well, except for the veg heads. Any other ideas?
Krepoort: We'll take a look at those guages. It sounds like a loose wire.
Blk4blk2k1: I think it'll be after 1:00PM, so no worries...
IncaCivic2001: Hmm... Good question. After 1:00PM sounds better than before, that's for sure. How about 2:00PM? Does that work for everyone?

Plenty of light at 2:00PM, 'cause working at night sucks! Bring something to drink; a two litre of your favorite would be good. It might be hot. Then again, it might be cold. Hopefully it'll be just right though. It is almost fall after all...

 
Rep Power: 0

I'll probably come by as early as your driveway can be 'available'. [IMG]i/expressions/face-icon-small-wink.gif[/IMG] Since I got a few things I wanna do, I wanna try to get them all done. We'll figure that out later on in the week, since I'm sure we'll talk before Sun comes around.

 
Rep Power: 414

Who else is coming to this thing???? The CT chickies??? Let's get some people that haven't joined us previously!!! Chime in everyone!!!!

 
Rep Power: 389

Has anyone met "icekitten" yet or silvercrush? Silvercrush is supposed to buy my cleared stocks, perhaps we could get him there and install them as well..???

 
Rep Power: 420

Well... IceKitten and her BF made it to the Six Flags meet, but they were there really late when we all had already left.
Silvercrush hooked up with us to go play some pool at Boston Billiards in Worcester. TwilightX, DarkCivic, Havok2k1, Sivikchik, and quickofftheline were all there too!

 
Rep Power: 0

I dont really have anything to install, but I can prob make it.

 
Rep Power: 0

It's all good man...hanging out is just as fine...I won't have anything to install either

 
Rep Power: 0

cool!



I wont be the only one.

 
Rep Power: 0

i might be in on sun and then again i might not be, its still up in the air...

 
Rep Power: 0

Hey again I just replaced my rear speakers and messed up the rear deck in the process as well as the trunk(the trunk as intentional)... see the speakers' depth was too deep so I had to remove the counter wait bars used to help lessen the trunks weight. Now my trunk weighs a hole lot more... My bumper just needs to be pulled in flush with the exterior frame of the vehicle..I think just needs tightening. So there are the gists of what I have to do...
Does anyone know where I could get some hydrolic arms quick to fix the trunk maybe even trick it out.
Oh and some directions as well. As far as bringing down some thing I am up for just about anything legal.... lol just let me know as I have alot of ish to do between now and then... Oh and I want to make it down there early enuff that I could maybe help setting things up for the meet say 10AM? Ne way I'll check back for responses, questions or comments. PEACE

 
Rep Power: 420

Everyone's invited!

noname: It'de be cool if you came on down again!
IncaCivic2001: Let us know what's up!
hjteq: What happened to the rear deck? Why is it "messed up"? I think the bumper is an easy fix if I'm thinking of the same thing that you're describing... I have "hydrolic arms"! Check out my Member's Rides Page for a picture. I bought everything from www.mcmaster.com; if you order everything you need today, then it may get to you in time for the install fest. I could help you with installing it. It's really easy. You'll need the gas shocks. Probably 40 pounds of extensible force. You'll need the little ball and socket joints. You'll need two mounting brackets for the back. You'll need a threading bit for the hole we'll drill out. That's it. If you're serious about this, then PM me and I'll give you a list of exactly what you need.

Oh yeah, to anyone that hasn't been at my house before...: PM me for directions to my house.

 
Rep Power: 0

I haven't...how do you get to your place? [IMG]i/expressions/face-icon-small-tongue.gif[/IMG]

 
Rep Power: 414

So the list is growing..... By the looks of thing, it looks like it may be all day install-fest. There seems to be interest from two people at getting to Grey's house early (like 10AM). Grey, how does that sound???? We should make an all day affair, with a BBQ at 1:00pm for lunch. What do you think?

I think I'll bring some grub too. Maybe I'll add it to the initial post. I'll post the name, how many people, and what you are bringing (even if it's something cheap like a bottle of soda or paper plates... )

Where are some more newbies or forum lurkers???? Silvercrush, you're from my town, stop bye for an hour. IceKitten, make a drive to meet the world's best moderator "The Greyness"..... How about people from CT???? Come up North and enjoy the day with us!!!!

 
Rep Power: 0

Ahhhh..young grasshopper has learned old Confucius saying...addresses are best kept at home, and off the internet...

 
Rep Power: 420

Havok2K1: I think 10AM is fine. As long as someone really wants to show up that early. I don't want to have to wake up at 10:00AM and wait till 1:00PM for people to show up. That would be kinda retarded. Anyways, 10AM sounds allright with me.

Krepoort: Hehe, yeah. You made me not post it. Remember? You're all paranoid, but it's good policy I guess...

 
Rep Power: 0

paranoid eh... Not considering a certain someone...you know...

 
Rep Power: 420

Oh, wait... I didn't mean to say that everyone is paranoid. Whoops! [IMG]i/expressions/laugh2.gif[/IMG]
Wait, who are you referring to? [IMG]i/expressions/face-icon-small-confused.gif[/IMG]

 
Rep Power: 0

Well I found out today I dislocated my ankle yesterday so I won't be coaching the rest of the week...so depending on how my driving foot feels it's a possibility I can make it Sunday....I'll leave it open [IMG]i/expressions/face-icon-small-smile.gif[/IMG]