NEW HEADLAMPS IN NOW!!!!
Thread Starter
Registered!!
iTrader: (93)
Joined: Oct 2001
Posts: 1,243
Likes: 0
From: California, US
Rep Power: 0 
NEW HEADLAMPS IN NOW!!!!
Finally..
I got the gun-metal headlamps in.
$165 plus S/H
IN STOCK, ready to rock & roll!!!
Linky to Order Online
Thanks
Rob
I got the gun-metal headlamps in.
$165 plus S/H
IN STOCK, ready to rock & roll!!!
Linky to Order Online
Thanks
Rob
you will be hearin from me soon!!!!! 
are you willing to match prices? i hope you got their permission to use their pic. don't want another eXBNP incident 
http://www.procarparts.com/store/dis...-0102-H100-GUN
http://www.procarparts.com/store/dis...-0102-H100-GUN
Registered!!
Joined: May 2002
Posts: 531
Likes: 0
From: , Other, ZEBRA
Rep Power: 0 Hmm. Interesting. You could just as easily clear your headlights and put an insert in. Of course this is much easier. [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
I want to see pics when anyone installs these.
I want to see pics when anyone installs these.
DIY:
1) take headlights apart like you are going to clear them
2) pull the chrome insert out of the headlight and remove th orange and clear reflecter peices. (it dosen matter if you break them, you dont need them)
3) tape off the running light circle with masking tape and trim the edges with a razerblade (do this lightly or you will scratch the chrome surface)
4) tape off the trun signal light if you want to ( i did not and it looks good, i'll have pics soon i hope)
5) using what ever color you want (high temp!) and spray 1 light coat so the paint does not run.
6) apply a few more coats of paint lightly let dry 10-15 min inbetween coats
7) let dry over night
8) put headlamp back together like normal headlight clear diy
9) install and watch people jock yo shi*
i know i dont have pic's but hopefull i can figure out how to post in the next day or so and i will then. have fun!
~nick~
1) take headlights apart like you are going to clear them
2) pull the chrome insert out of the headlight and remove th orange and clear reflecter peices. (it dosen matter if you break them, you dont need them)
3) tape off the running light circle with masking tape and trim the edges with a razerblade (do this lightly or you will scratch the chrome surface)
4) tape off the trun signal light if you want to ( i did not and it looks good, i'll have pics soon i hope)
5) using what ever color you want (high temp!) and spray 1 light coat so the paint does not run.
6) apply a few more coats of paint lightly let dry 10-15 min inbetween coats
7) let dry over night
8) put headlamp back together like normal headlight clear diy
9) install and watch people jock yo shi*
i know i dont have pic's but hopefull i can figure out how to post in the next day or so and i will then. have fun!
~nick~
Registered!!
Joined: Dec 2001
Posts: 667
Likes: 0
Rep Power: 0
Quote
[hr]Originally posted by: Wanger
are you willing to match prices? i hope you got their permission to use their pic. don't want another eXBNP incident
http://www.procarparts.com/store/dis...-0102-H100-GUN[hr]
[hr]Originally posted by: Wanger
are you willing to match prices? i hope you got their permission to use their pic. don't want another eXBNP incident
http://www.procarparts.com/store/dis...-0102-H100-GUN[hr]
and I trust ordering from them over procarparts because I've had good experiences w/ tornactive & have heard A LOT of negative feedback re procarparts.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
stryder12
Archive - Parts for Sale
3
Jun 30, 2015 08:33 PM
carid
General Automotive Discussion
2
Jun 5, 2015 11:51 PM
slikor
General Honda Civic Forum Archive.
1
Dec 3, 2002 03:26 PM
