*New pics* Mah RiDe w/mah 19"RH C3 !!!!!
Thread Starter
Registered!!
Joined: Apr 2002
Posts: 66
Likes: 0
From: h-town, Texas, US
Rep Power: 0 
*New pics* Mah RiDe w/mah 19"RH C3 !!!!!
Here are mah new pics finally!!! Ive had these wheels since March 14th....and I just bearly got pics to show!!!! Enjoy!!! Tell me what yall think.........
Thread Starter
Registered!!
Joined: Apr 2002
Posts: 66
Likes: 0
From: h-town, Texas, US
Rep Power: 0 There is slight rubbing like if I hit a bump while turning the wheel....or if I hit a large bump then it rubs a little bit.... but thats only cus I like to drive my car really low. If I were to raise it up it would not rub at all......
Thread Starter
Registered!!
Joined: Apr 2002
Posts: 66
Likes: 0
From: h-town, Texas, US
Rep Power: 0 Yes i had to cut the inside of my rear fender well.... just trim it up a bit..otherwise the 19's wouldnt fit with my camber kit.... Id have to ride with a bad camber.... so thats why i cut the inside so I can still have positive camber with 19's
Registered!!
Joined: May 2001
Posts: 428
Likes: 0
Rep Power: 0 nice car vuthy, damn this the wheels i always wanted for the longest, well that design, in black, gunmetal or some sort a shade of black. nice.. your car is almost the same combination as my car.. the front, sticker, and rims (coming soon!) gotta pay for some other shizz..
Thread Starter
Registered!!
Joined: Apr 2002
Posts: 66
Likes: 0
From: h-town, Texas, US
Rep Power: 0 man i got like alot of tool to work on cars with..... i used a rotozip for the fenders...and I got the dash kit from Honda dealership, then I sanded it down and painted it silver.
the stock aluminum Honda color it comes in is kinda brownish looking...[IMG]i/expressions/face-icon-small-disgusted.gif[/IMG]
the stock aluminum Honda color it comes in is kinda brownish looking...[IMG]i/expressions/face-icon-small-disgusted.gif[/IMG]
Registered!!
Joined: Oct 2001
Posts: 238
Likes: 0
From: Houston, Texas, US
Rep Power: 0 So clean i wish i could get 18's or 19's but streets suck inside the loop. They must have really nice ones in North Shore. Where did you get your kit painted? My Xenon kits paint is cracking a little and some is peelin off
BOOST JUNKY
iTrader: (6)
Joined: Nov 2001
Posts: 1,759
Likes: 0
From: Wide Open Throttle
Rep Power: 0 THe car looks nice. I don't like that wing though. Looks like if you go fast enough, u might take off. [IMG]i/expressions/laugh2.gif[/IMG] no offense. Otherwise, it looks real sweet. [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
Registered!!
Joined: Nov 2001
Posts: 2,489
Likes: 0
From: Houston, Texas, US
Rep Power: 0 It looks like some of the paint is chipping. I think it could be from the bugs that stick to the bumper. Is there anything that I can put on it to protect it? How do you keep your bumper so clean?
Registered!!
iTrader: (1)
Joined: Jun 2001
Posts: 336
Likes: 0
From: Easley, South Carolina, US
Rep Power: 0 dang--car looks real good--i like the wing--you've got the same look I'm wantin to go for--as for the chippin paint thing, they might not have used an adhesion promoter when they painted it, might not have scuffed the bumper properly, or might not have used a flex agent in the clear coat. Could be any of the above.
Thread Starter
Registered!!
Joined: Apr 2002
Posts: 66
Likes: 0
From: h-town, Texas, US
Rep Power: 0 << Hey Vu, where is a good place to buy a bodykit in HOuston? >>
any shop in Houston can get you a body kit.... its a matter of how good you know the shop owner if they hook you up or not. I can get you a kit from either Carboy, Showtime, or Hyper...just let me know and ill see what kind of price I can get ya.....call me up .
.. mad props.. 
yo vu, thats a sweet *** ride. i miss the car scene in houston. here in michigan its like ricer heaven. was gonna keep my car clean, but after seeing yours, i might finish up my ride with some skirts and a rear bumper.
