Huge D17 Built Engine for Turbo.. part out and more...LOOK
Thread Starter
Abortion Survivor
iTrader: (33)
Joined: Aug 2004
Posts: 2,967
Likes: 0
From: Az
Rep Power: 295 
Huge D17 Built Engine for Turbo.. part out and more...LOOK
TYC Tail lights- Make offer-good condition
Picture624.jpg
Picture625.jpg
Picture626.jpg
Srt 4 injectors with clips. SOLD!!!!!!
Golden Eagle Rear Bumper Diffuser kit with hardware, brand new has some wear from seating around and being moved but still in good condition. 100 shipped
Picture635.jpg
Kms Intake manifold*Rare* with www.maxbore.com ported throttle body. SOLD!!!!!!!!! and Shipped!
Rsx Conversion for EM2 ready to go, plug and play. Gauges have about 55000 miles 300 shipped
PIC_0355.jpg
Custom Return Fuel System, made by opto, was the First ever return fuel system, includes a walbro 255 pump and all the lines and fittings to get it to work. Aeromotive Fpr and a FPR gauge. 250 shipped
PIC_0351.jpg
IMG_1913.jpg
IMG_1912.jpg
IMG_1911.jpg
IMG_1910.jpg
IMG_1909.jpg
IMG_1908.jpg
IMG_1906.jpg
Aem Ems 30-1030 w/ 3.5 bar map sensor 850 shipped includes 100 dollar map sensor. and all harnesses
PIC_0316.jpg
PIC_0315.jpg
Fully Built Engine w less than 5000 miles. Ready for boost. Never boosted on. Head is a ex head with crower valves crower valvesprings crower retainers and crower stage 3 cam. It is also ported and polish which was done by exospeed racing.
Block is lx block that is darton sleeved(done by Darton), 75mm stock bore so still has plenty of potential. Wiseco custom pistons 9.0:1 compression with Crower Steel Rods. Oem bearings were used by color code and all clearances were checked. new oil pump, new water pump
I will seperate the block and head and sell seperately.
Here is your chance to save big money and have a good reliable set up, I have spent thousands to complete all this and now I just wanna sell it all to finish my other project. I have plenty of vouches all around and I am willing to work with people. I will consider trades for stock parts plus cash, so its like a discount for stock parts but they must be in working condition just like my parts.
fullybuilt.jpg
PIC_0134.jpg
PIC_0135.jpg
PIC_0138.jpg
PIC_0139.jpg
before build
Picture018.jpg
Picture017.jpg
Picture016.jpg
Picture015.jpg
Picture014.jpg
Picture012.jpg
PIC_0140.jpg
Front Progress Sway Bar with all hardware SOLD SOLD SOLD!!!!!!
Dezod Polished Intercooler, BRAND NEW NEVER installed. Make good offer.
PIC_0521.jpg
Also have the Ingalls Motor mount 100 shipped obo takes it, its in great condition and comes with all hardware
Pics of the head.
IMG_1904.jpg
IMG_1898.jpg
IMG_1897.jpg
IMG_1894.jpg
IMG_1893.jpg
The head is extremely clean still.
Picture624.jpg
Picture625.jpg
Picture626.jpg
Srt 4 injectors with clips. SOLD!!!!!!
Golden Eagle Rear Bumper Diffuser kit with hardware, brand new has some wear from seating around and being moved but still in good condition. 100 shipped
Picture635.jpg
Kms Intake manifold*Rare* with www.maxbore.com ported throttle body. SOLD!!!!!!!!! and Shipped!
Rsx Conversion for EM2 ready to go, plug and play. Gauges have about 55000 miles 300 shipped
PIC_0355.jpg
Custom Return Fuel System, made by opto, was the First ever return fuel system, includes a walbro 255 pump and all the lines and fittings to get it to work. Aeromotive Fpr and a FPR gauge. 250 shipped
PIC_0351.jpg
IMG_1913.jpg
IMG_1912.jpg
IMG_1911.jpg
IMG_1910.jpg
IMG_1909.jpg
IMG_1908.jpg
IMG_1906.jpg
Aem Ems 30-1030 w/ 3.5 bar map sensor 850 shipped includes 100 dollar map sensor. and all harnesses
PIC_0316.jpg
PIC_0315.jpg
Fully Built Engine w less than 5000 miles. Ready for boost. Never boosted on. Head is a ex head with crower valves crower valvesprings crower retainers and crower stage 3 cam. It is also ported and polish which was done by exospeed racing.
Block is lx block that is darton sleeved(done by Darton), 75mm stock bore so still has plenty of potential. Wiseco custom pistons 9.0:1 compression with Crower Steel Rods. Oem bearings were used by color code and all clearances were checked. new oil pump, new water pump
I will seperate the block and head and sell seperately.
Here is your chance to save big money and have a good reliable set up, I have spent thousands to complete all this and now I just wanna sell it all to finish my other project. I have plenty of vouches all around and I am willing to work with people. I will consider trades for stock parts plus cash, so its like a discount for stock parts but they must be in working condition just like my parts.
fullybuilt.jpg
PIC_0134.jpg
PIC_0135.jpg
PIC_0138.jpg
PIC_0139.jpg
before build
Picture018.jpg
Picture017.jpg
Picture016.jpg
Picture015.jpg
Picture014.jpg
Picture012.jpg
PIC_0140.jpg
Front Progress Sway Bar with all hardware SOLD SOLD SOLD!!!!!!
Dezod Polished Intercooler, BRAND NEW NEVER installed. Make good offer.
PIC_0521.jpg
Also have the Ingalls Motor mount 100 shipped obo takes it, its in great condition and comes with all hardware
Pics of the head.
IMG_1904.jpg
IMG_1898.jpg
IMG_1897.jpg
IMG_1894.jpg
IMG_1893.jpg
The head is extremely clean still.
Last edited by Michalo187; Feb 12, 2010 at 01:28 PM.
Thread Starter
Abortion Survivor
iTrader: (33)
Joined: Aug 2004
Posts: 2,967
Likes: 0
From: Az
Rep Power: 295 Re: Huge D17 Built Engine for Turbo part out.
Pm's answered thanks for the interest. Make offers, worse i can say is no. IF you buy more stuff I will give you better deals.
Thread Starter
Abortion Survivor
iTrader: (33)
Joined: Aug 2004
Posts: 2,967
Likes: 0
From: Az
Rep Power: 295 Re: Huge D17 Built Engine for Turbo part out.
Pm's answered thanks for the interest. Make offers, worse i can say is no. IF you buy more stuff I will give you better deals.
Thread Starter
Abortion Survivor
iTrader: (33)
Joined: Aug 2004
Posts: 2,967
Likes: 0
From: Az
Rep Power: 295 Re: Huge D17 Built Engine for Turbo.. part out and more...LOOK
I want 1000 for the block
Just the Rods were 700 and the pistons were 500, sleeves were 325 plus install, then all machine work, all new parts(New water pump, New oil pump, New timing belt) All parts used are OEM from Honda.
Just do the math, I have over 2000 into this block easily.
Just the Rods were 700 and the pistons were 500, sleeves were 325 plus install, then all machine work, all new parts(New water pump, New oil pump, New timing belt) All parts used are OEM from Honda.
Just do the math, I have over 2000 into this block easily.
sold already 
Thread Starter
Abortion Survivor
iTrader: (33)
Joined: Aug 2004
Posts: 2,967
Likes: 0
From: Az
Rep Power: 295 Re: Huge D17 Built Engine for Turbo.. part out and more...LOOK
hahaha wow thats very ironic, I just finished taking the head off about 10 minutes ago.....I will take some pics of it off the block and post ASAP. It comes with crower stage 3 cam, Crower valves, Crower valvesprings and retainers, and exospeed port n polish.
Thread Starter
Abortion Survivor
iTrader: (33)
Joined: Aug 2004
Posts: 2,967
Likes: 0
From: Az
Rep Power: 295 Re: Huge D17 Built Engine for Turbo.. part out and more...LOOK
pm sent! Will have those pics up tomorrow for sure, I got really sick this weekend and havent uploaded them.
Thread Starter
Abortion Survivor
iTrader: (33)
Joined: Aug 2004
Posts: 2,967
Likes: 0
From: Az
Rep Power: 295 Thread Starter
Abortion Survivor
iTrader: (33)
Joined: Aug 2004
Posts: 2,967
Likes: 0
From: Az
Rep Power: 295 
Registered!!
Joined: Dec 2009
Posts: 17
Likes: 0
Rep Power: 0 
Re: Huge D17 Built Engine for Turbo.. part out and more...LOOK
Hey wats up I have a stock d17a2 engine if u want to trade that for the head and the block plus some cash u let me kno how much money u want on top of the d17a2.......
