S2000 head on K20
Thread Starter
The World Is Yours!
iTrader: (4)
Joined: Jul 2003
Posts: 2,617
Likes: 0
From: behind my D80
Rep Power: 325 
S2000 head on K20
well i went to my local tuner shop Mainstram Performance, and some of the mechanics i heard there sayin that a F20c head can bolt on to a k20?
so i dont know if it's rambling but i also read in Xproductions DIY for the K20 swap that a head might be able to bolt up, some day in age, to the infamous K20. myth or just rambling of the mouth. i am curious of so let me know....
so i dont know if it's rambling but i also read in Xproductions DIY for the K20 swap that a head might be able to bolt up, some day in age, to the infamous K20. myth or just rambling of the mouth. i am curious of so let me know.... 
I need TP for my bunghole
iTrader: (3)
Joined: Jan 2003
Posts: 7,103
Likes: 0
From: OXNARD, CA. SoCal. "805", North of L.A.
Rep Power: 359
Originally Posted by scansel912
I know a K20 6 speed can bolt up to the F20c engine. Dunno about the head though.
read here, go t the very last post on this page and the bottom there is a email from hasport that covers this: http://www.7thgencivic.com/forums/sh...=234340&page=4
Last edited by PunkingCivic; May 18, 2006 at 06:34 PM.
Thread Starter
The World Is Yours!
iTrader: (4)
Joined: Jul 2003
Posts: 2,617
Likes: 0
From: behind my D80
Rep Power: 325 so i take with lots of mods after all the K20A is close to prodcing, the Ltus shows pretty awesome power, the eg with the head and all....well, this is too much for a standing-out look! a K20a2 would be far plenty! if not a K20A
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
7thgensurvivor
Mechanical Problems/Vehicle Issues and Fix-it Forum
12
Aug 26, 2015 06:17 PM
Kyles24
Overheating or loss of coolant, heater blowing cold
0
Jul 12, 2015 09:15 PM
