need help with tokico hp and neuspeed springs

Reply Subscribe

Thread Tools

Search this Thread

Jan 7, 2006

james mauldin

Thread Starter

Registered!!

Joined: Jul 2005

Posts: 38

Likes: 0

From: loganville,ga

Rep Power: 0

james mauldin is an unknown quantity at this point

need help with tokico hp and neuspeed springs

I have hp shocks and neuspeed springs. In the rear the spring are not fiting over the shocks . do i need to make them or is something wrong ?

Last edited by james mauldin; Jan 7, 2006 at 12:57 PM.

Jan 7, 2006

half_n_half17

Registered!!

Joined: Aug 2003

Posts: 505

Likes: 0

From: 480

Rep Power: 0

half_n_half17 is an unknown quantity at this point

try putting the springs in with the "neuspeed" writing upside down. It threw me off when I installed mine.

Jan 8, 2006

c kim

Registered!!

iTrader: (1)

Joined: Aug 2004

Posts: 111

Likes: 0

From: Columbus Ohio

Rep Power: 0

c kim is an unknown quantity at this point

^yeah, i think he's right. Mine were upside down also as I recall. I also have the tokico/neuspeed setup. I guess there was an error with the printing of the neuspeed logo, no big deal.

Jan 8, 2006

Stachmo

"You leave me in the trenches taking Grenades, John"

iTrader: (2)

Joined: Jan 2005

Posts: 684

Likes: 0

From: Connecticut/Bryant University

Rep Power: 0

Stachmo is an unknown quantity at this point

mine was upside down as well...give it a try

Jan 15, 2006

Diablo

Registered!!

iTrader: (5)

Joined: Jul 2002

Posts: 585

Likes: 0

From: Milwaukee,WI

Rep Power: 0

Diablo is an unknown quantity at this point

Yes the back go with the writing upside down.rear springs only fit one way. now the front neuspeed springs have a side thats flat that goes up toward the strut bearing, in case you didn't now. that is what neuspeed told me. and thats how i installed mine.