D17 Engine Goods FS Pics Not 56K
Thread Starter
Registered!!
iTrader: (5)
Joined: Jan 2004
Posts: 594
Likes: 0
From: Halifax, Nova Scotia
Rep Power: 0 
D17 Engine Goods FS Pics Not 56K
These pics are all of new/never installed parts I bought over the course of a year, was going to build a really fun/fast turbo car, but now I have no time to do this project, and it is all for sale. I am selling my car too to buy a new SI.
Prices are not all set yet, but if you are interested in something, and have a decent offer, PM me, and I will get a price for you. Buyer pays all shipping and handling charges. Sorry I have not priced everything, but I will try to answer serious questions as best I can.
I will be busy most of the weekend, but I am free most evenings, so please be patient if you have sent me a PM, and I have not replied yet.
Thanks
Prices are not all set yet, but if you are interested in something, and have a decent offer, PM me, and I will get a price for you. Buyer pays all shipping and handling charges. Sorry I have not priced everything, but I will try to answer serious questions as best I can.
I will be busy most of the weekend, but I am free most evenings, so please be patient if you have sent me a PM, and I have not replied yet.
Thanks
Thread Starter
Registered!!
iTrader: (5)
Joined: Jan 2004
Posts: 594
Likes: 0
From: Halifax, Nova Scotia
Rep Power: 0
Originally Posted by Pedro Lopes
what are the details on the block and the head. Are they both stock .
Both designed for turbo setup using high boost applications if wanted (up to 20 psi they can handle I specified when it was being built).
Drunken Master-7thgen Ninja
iTrader: (21)
Joined: Jun 2005
Posts: 7,976
Likes: 0
From: georgia
Rep Power: 337 
interested in cam gear and the flywheel? is it stock or lightened? hit me with some prices. and what kind of cam is that? stage 1 or 2? turbo or N/a? price? is that rust on the tranny stuff? never used for real?
ummm...retainers, pistons, and springs prices too lol
ummm...retainers, pistons, and springs prices too lol
Thread Starter
Registered!!
iTrader: (5)
Joined: Jan 2004
Posts: 594
Likes: 0
From: Halifax, Nova Scotia
Rep Power: 0 Sorry I took so long to reply to this thread, busy weekend. Here are some prices I have been telling everyone on this stuff. All prices are still plus shipping.
Block - built for turbo, 20 psi max, custom low compression high temp pistons & rings, upgraded rods, bearings and crank, and block guard - $2400
P&P VTEC Head - KMS springs & retainers (for higher rpm), ported for turbo setup not NA setup- $600
Custom IM $400
74mm DH Billett TB $300
74mm bored TB $150
Stage 2 turbo Cam $250
Moroso Racing Vacuum Pump Breather Tank - $75
Adjustable red Cam gear - $100
Grounding kit - $50
11 lb Flywheel, not used, some surface rust (actually looks like palm & fingerprints tarnishing) - $150
ACT Pressure plate (up to 300 Hp), not used, some surface rust on fingers only - $150
6 Puck clutch - no rust, will grab hard (up to 300 Hp) - $100
Block - built for turbo, 20 psi max, custom low compression high temp pistons & rings, upgraded rods, bearings and crank, and block guard - $2400
P&P VTEC Head - KMS springs & retainers (for higher rpm), ported for turbo setup not NA setup- $600
Custom IM $400
74mm DH Billett TB $300
74mm bored TB $150
Stage 2 turbo Cam $250
Moroso Racing Vacuum Pump Breather Tank - $75
Adjustable red Cam gear - $100
Grounding kit - $50
11 lb Flywheel, not used, some surface rust (actually looks like palm & fingerprints tarnishing) - $150
ACT Pressure plate (up to 300 Hp), not used, some surface rust on fingers only - $150
6 Puck clutch - no rust, will grab hard (up to 300 Hp) - $100
Thread Starter
Registered!!
iTrader: (5)
Joined: Jan 2004
Posts: 594
Likes: 0
From: Halifax, Nova Scotia
Rep Power: 0
Originally Posted by drunkenmagnum
who made the intake manifold? does it cause you to loose any features? (ex: cruise control or anything?)
Thread Starter
Registered!!
iTrader: (5)
Joined: Jan 2004
Posts: 594
Likes: 0
From: Halifax, Nova Scotia
Rep Power: 0 Dropped Some Prices
Block - built for turbo, 20 psi max, custom low compression high temp pistons & rings, upgraded rods, bearings and crank, and block guard - $2000
P&P VTEC Head - KMS springs & retainers (for higher rpm), ported for turbo setup not NA setup- $450
Custom IM $300
74mm DH Billett TB $250
74mm bored TB $100
Stage 2 turbo Cam $200
Moroso Racing Vacuum Pump Breather Tank - $50
Adjustable red Cam gear - $75
Grounding kit - $50
11 lb Flywheel, not used, some surface rust (actually looks like palm & fingerprints tarnishing) - SOLD
ACT Pressure plate (up to 300 Hp), not used, some surface rust on fingers only - SOLD
6 Puck clutch - no rust, will grab hard (up to 300 Hp) - SOLD
Turbo Gauges and E-Manage with all harnesses for sale too...
P&P VTEC Head - KMS springs & retainers (for higher rpm), ported for turbo setup not NA setup- $450
Custom IM $300
74mm DH Billett TB $250
74mm bored TB $100
Stage 2 turbo Cam $200
Moroso Racing Vacuum Pump Breather Tank - $50
Adjustable red Cam gear - $75
Grounding kit - $50
11 lb Flywheel, not used, some surface rust (actually looks like palm & fingerprints tarnishing) - SOLD
ACT Pressure plate (up to 300 Hp), not used, some surface rust on fingers only - SOLD
6 Puck clutch - no rust, will grab hard (up to 300 Hp) - SOLD
Turbo Gauges and E-Manage with all harnesses for sale too...
Thread Starter
Registered!!
iTrader: (5)
Joined: Jan 2004
Posts: 594
Likes: 0
From: Halifax, Nova Scotia
Rep Power: 0
Originally Posted by mugenman
would the lsd work in an automatic? if so ill take it depending on price
Yes, will work on Auto or Manual Trans. I paid $330 for this and it is still new. So I think about $175 is a fair price.
Thread Starter
Registered!!
iTrader: (5)
Joined: Jan 2004
Posts: 594
Likes: 0
From: Halifax, Nova Scotia
Rep Power: 0
Originally Posted by HwNpRyDe_CiViC
how much for the cam gear and camshaft.. what camshaft is that.. crower and what stage? can i put on my stock ex 04 ending
