Rep Power: 0

Announcing a new line for Performance Systems- Innovate Motorsports Wideband Sensor Kits

All kits are $30-$75 off of retail prices, and all Innovate Motorsports products are available, so if you don't see something you want, just PM me, it just hasn't been added to the web store yet.

The LM-1 Portable Wideband Sensor Kit:

Tuning an engine for maximum power previously required long trial-and-error sessions on a dynamometer. With the LM-1, precise AFR measurement allows the user to correctly adjust many variables- including carburetor jetting, fuel injection, turbo fuel curves, etc.- without long and expensive dyno sessions. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-1’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

The instrument can sample and store 6 channels of data- air-fuel-ratio and up to 5 other sensor data channels- internally in operation for later analysis on a personal computer. At a sampling rate of 12 samples/second the instrument can store up to 44 minutes worth of data in non-volatile memory. The data can be downloaded to a personal computer using a standard serial port and viewed/analyzed by the included software or any standard spreadsheet program

Perfect for use in multiple cars, as there is no permanent mounting. Just use the cigarette lighter for power, put the exhaust sensor into the exhaust stream, and go tuning!


The Standalone Gauge Kit:

The Innovate “Standalone Gauge Kit” comes complete with the NEW! LC-1 Wideband Controller, NEW! XD-1 Programmable Digital Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Software CD, and owners manual.

The LC-1 is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 programmable analog outputs.

The Innovate XD-1 dash-mountable Digital Gauge features programmable LED colors and remote control button to start and stop LM-1 log sessions or initiate calibration. The entire gauge is a mere .750" thick, so it's possible to mount even in surface mount configurations. The display features a 3 character central LED display, remote control button, and a programmable digital needle. The body is a billet aluminum bezel.

Perfect for mounting in your car permanently so that you always know the air fuel ratio of your engine accurately. Mounts in a standard 2 1/16th gauge pod or can be custom mounted anywhere. Comes with all necessary installation accessories.