Carbon Fiber Lip For 01-03 Civic (2/4dr)
Thread Starter
Registered!!
iTrader: (93)
Joined: Oct 2001
Posts: 1,243
Likes: 0
From: California, US
Rep Power: 0 
Carbon Fiber Lip For 01-03 Civic (2/4dr) 
Carbon Fiber Front Spoiler
Invidia, a leader in the field of carbon fiber spoilers, offers the serious motorsports enthusiast a combination of top-quality materials and superb craftsmanship. The Invidia engineering philosophy, based on two decades of experience is one of continuous refinement-constant improvements through engineering innovation.
Quality Engineering
50% Lower Weight
Aggressive Design
Improves Aerodynamics
Order Here: http://www.robearracing.com/pd_carbon_fiber.cfm
www.robearracing.com
Joined: Apr 2002
Posts: 26,704
Likes: 0
From: Poco, B.C. Canada
Rep Power: 564 
That's a nice peice....I'm sure by the time I did the conversion, paid for shipping and duty it would cost me just shy of a trillion dollars but I'll bump this none the less.
Superior Evolutionary Element Destined-factor
iTrader: (10)
Joined: Apr 2004
Posts: 1,290
Likes: 0
From: Toronto
Rep Power: 0
Originally Posted by Pharoh
That's a nice peice....I'm sure by the time I did the conversion, paid for shipping and duty it would cost me just shy of a trillion dollars but I'll bump this none the less.
Ok, I received the lip today. Quality is ok, few areas that I'm far from impressed on, as the edges are scuffed, scratches on the bottom side, and cloudiness in the clear. Is there suppose to be instructions, or any sort of mounting hardware included with this?? That's what I really want to know.
u'll more than likely need to get mounting screws and a drill (or dremel) and do it on ur own just putting mounting screws on each side of the lip and also if u want using double sided tape along the lip as well. unfortunately yo, its hard to get CF pieces in perfect condition specially when shipped.
Originally Posted by 02civic_rida
u'll more than likely need to get mounting screws and a drill (or dremel) and do it on ur own just putting mounting screws on each side of the lip and also if u want using double sided tape along the lip as well. unfortunately yo, its hard to get CF pieces in perfect condition specially when shipped.
One screw on each side, in the fender well area? Nothing from the bottom, going up? Double sided tape all the way across, or just in the lower grill area? I figured there would be more to this, than what was received.
Smuggling bananas and mexicans all for one low price...
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Joined: Aug 2003
Posts: 9,996
Likes: 0
From: Langley AFB, VA
Rep Power: 396
Originally Posted by whitevic
Totally agree on the shipping part, but you can take proactive measures, so things like this wont happen. Like ship it in a box that it actually fits in, as well as use more than one layer, of the cheap bubble wrap..
One screw on each side, in the fender well area? Nothing from the bottom, going up? Double sided tape all the way across, or just in the lower grill area? I figured there would be more to this, than what was received.
One screw on each side, in the fender well area? Nothing from the bottom, going up? Double sided tape all the way across, or just in the lower grill area? I figured there would be more to this, than what was received.
Originally Posted by TheSmuggler
Carbon fiber is so light it can easily be held in place with 3m panel bonding tape. That stuff could hold a small child to the car
Smuggling bananas and mexicans all for one low price...
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Joined: Aug 2003
Posts: 9,996
Likes: 0
From: Langley AFB, VA
Rep Power: 396 what can scratch? lol, carbon fiber is actually quite storng, it's going to scratch just the same as any other lip. It's the clearcoat scrtaching most of the time anyways. It does have a tendancy to spider crack when shipped in small cramped packages =)
Smuggling bananas and mexicans all for one low price...
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Joined: Aug 2003
Posts: 9,996
Likes: 0
From: Langley AFB, VA
Rep Power: 396 If you mean the tape I don't see how that can scratch, it goes right on, then peals off, I've peeled it of CF before and it dosen't leave any markers, maybe just some residue for the goo gone to take care of.
Thread Starter
Registered!!
iTrader: (93)
Joined: Oct 2001
Posts: 1,243
Likes: 0
From: California, US
Rep Power: 0
Originally Posted by whitevic
Ok, I received the lip today. Quality is ok, few areas that I'm far from impressed on, as the edges are scuffed, scratches on the bottom side, and cloudiness in the clear. Is there suppose to be instructions, or any sort of mounting hardware included with this?? That's what I really want to know.
As for the packaging, we have boxes specifically made for lips. Please dont slander us on that part, as we take HUGE pre-cautions to prevent any type of damage during shipping.
If you have ANY problems , please call us dont post it on here, as this is not my website and am not here everyday!
Thanks
RoBear Racing
909-982-4927
Last edited by RobearRacing; May 12, 2005 at 12:39 PM.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
nickeynick
Archive - Parts for Sale
0
Apr 27, 2015 01:23 PM
blacklud
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
Apr 13, 2015 06:15 PM
jaje
General Honda Civic Forum Archive.
38
May 16, 2009 12:29 AM
