Damm Potholes In Mexico!!!!
Thread Starter
Registered!!
Joined: Aug 2003
Posts: 217
Likes: 0
From: Chino 909
Rep Power: 0 
Damm Potholes In Mexico!!!!
Well I went to Rosarito last night..and on the way there I hit this big *** pothole..nd blew my tire...so yea my nite in rosarito was kinda jacked up cause of that..it bent my rim too...do you guys kno a place that can bend my rim back to normal..if possible...dammm...any suggestions would help out alot..thanks
Try Mag Masters in Santa Ana, although it's far from Chino. My friend had 2 bent rims repaired there and Mag Masters did an excellent job.
Here's the address if you want to check it out:
Mag Masters:
1419 E Edinger
Santa Ana, CA
Here's the address if you want to check it out:
Mag Masters:
1419 E Edinger
Santa Ana, CA
Thread Starter
Registered!!
Joined: Aug 2003
Posts: 217
Likes: 0
From: Chino 909
Rep Power: 0
Originally Posted by SLeePeRCIVICHopeful
Try Mag Masters in Santa Ana, although it's far from Chino. My friend had 2 bent rims repaired there and Mag Masters did an excellent job.
Here's the address if you want to check it out:
Mag Masters:
1419 E Edinger
Santa Ana, CA
Here's the address if you want to check it out:
Mag Masters:
1419 E Edinger
Santa Ana, CA
Thread Starter
Registered!!
Joined: Aug 2003
Posts: 217
Likes: 0
From: Chino 909
Rep Power: 0
Originally Posted by monkeyness
how much does it normally run? price wise... i have a bent rim too =(
..It was a trip..cause we were scared to get rolled by the mexico 5-0..haha..and we got lost for a bit also..so when I finally got to rosarito I tried to have fun ..but when i bent my rim..it was over..haha..nex time im jus gonnna taxi it..
From what I remember, my friend payed $80 for the more bent rim, and about $70 for the second rim (both were bent by a HUGE pothole), but the quality of the work would explain the prices. You might also have to get it refinished as well, so just letting you know.
Thread Starter
Registered!!
Joined: Aug 2003
Posts: 217
Likes: 0
From: Chino 909
Rep Power: 0
Originally Posted by SLeePeRCIVICHopeful
From what I remember, my friend payed $80 for the more bent rim, and about $70 for the second rim (both were bent by a HUGE pothole), but the quality of the work would explain the prices. You might also have to get it refinished as well, so just letting you know.
Registered!!
Joined: Jan 2003
Posts: 150
Likes: 0
From: Chino, California, US
Rep Power: 0 dang that sux....
yea i went to rosarito on friday... those potholes are vicious
i almost hit a big one on the on ramp to the 1 highway headin out to rosarito... not to mention all the times my car bottomed out on speed bumps and headin into the driveways... i swear the bottom of my car is probably all bare metal...
time to go buy some cans of undercoating so it don't rust...
all in all i had a great time...lots of alcohol and the ladies were gettin down with their bad selfs.... 
yea i went to rosarito on friday... those potholes are vicious
i almost hit a big one on the on ramp to the 1 highway headin out to rosarito... not to mention all the times my car bottomed out on speed bumps and headin into the driveways... i swear the bottom of my car is probably all bare metal...
time to go buy some cans of undercoating so it don't rust...
all in all i had a great time...lots of alcohol
and the ladies were gettin down with their bad selfs.... 
ThE CoRRupToR
iTrader: (13)
Joined: Oct 2002
Posts: 5,985
Likes: 0
From: los angeles, California, US
Rep Power: 346
Originally Posted by HondaLuver
i went down there with my vic, it made it fine... just dirty...
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
jimmy23
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Aug 31, 2015 10:35 PM
alwaysloyal360
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
Jul 29, 2015 02:26 PM
