Fs: Parting Out My D17a2 Ex 5spd Engine!! Engine Head And More!! PICTURES ADDED!
Thread Starter
Registered!!
iTrader: (10)
Joined: Apr 2004
Posts: 465
Likes: 0
From: Southern California
Rep Power: 0 
Fs: Parting Out My D17a2 Ex 5spd Engine!! Engine Head And More!! PICTURES ADDED!
Okay I'm parting out the entire engine. I hydrolocked it and had to replce it so I am selling all of the good parts off the enigine. All parts have about 43k on them and are in good condition unless mentioned otherwise. Pricing will determined by bidding. (I've never sold anything by bidding before so this should be fun). If you want to bid on an item, post A HIGHER BID AT LEAST $1.00 HIGHER THAN THE CURRENT BID LISTED. I will then change the bid next to the item and put your screen name down as the highest bidder. The bidding will continue until I am satisfied with the price(I'm not going to be too picky on this). If you want to bypass bidding and make a serious offer then feel free to.
NO REASONABLE OFFER WILL BE TURNED DOWN
I only take cash in hand or paypal +3%. Buyer pays all shipping costs. I will send as many pictures as you want to your email upon request.
If you have any questions feel free to post or contact me. OKAY, HERE ARE THE ITEMS:
-D17A2 EX HEAD COMPLETE WITH V-TEC SOEILNOID. Needs some work done (probably needs to be re-valved) Perfect for those of you who want to p&p and and build it for boosted applications. CURRENT BID PRICE: $85.00 HIGH BIDDER AND WINNER IS NOLIMITRICAN. UPDATE:NOLIMITRICAN WAS A DEADBEAT BIDDER THE HEAD NOW GOES TO THE NEXT IN LINE (DIGGAFLIP)
-AC COMPRESSOR- STARTING BID PRICE: $9.99
- METAL VALVE COVER- CURRENT BID PRICE: $30.00- HIGH BIDDER AND WINNER IS ROCKHOUND124
-Plastic valve cover- CURRENT BID PRICE: $10.99-HIGH BIDDER AND WINNER IS LEGEND921
- P.S. PUMP-STARTING BID PRICE: $9.99
- INTAKE MANIFOLD WITH THROTTLE BODY AND ALL SENSORS ATTACHED-STARTING BID PRICE: $49.99
-CLUTCH AND FLYWHEEL- STARTING BID PRICE: $29.99
-WATER PUMP WITH TEMP SENSOR AND THERMOSTAT- STARTING BID PRICE: $4.99
-TIMING BELT COVER-STARTING BID PRICE: $2.99
-FUEL RAIL WITH INJECTORS- STARTING BID PRICE: $19.99
I have the entire engine so If you want any mounts or other parts not listed then feel free to ask. I may have just what you're looking for.
AGAIN, IF YOU WANT TO SEE PICTURES THEN POST OR PM ME YOUR EMAIL ADDRESS WITH A DESCRIPTION OF WHAT YOU WANT PHOTOGRAPHED.
NO REASONABLE OFFER WILL BE TURNED DOWN I only take cash in hand or paypal +3%. Buyer pays all shipping costs. I will send as many pictures as you want to your email upon request.
If you have any questions feel free to post or contact me. OKAY, HERE ARE THE ITEMS:
-D17A2 EX HEAD COMPLETE WITH V-TEC SOEILNOID. Needs some work done (probably needs to be re-valved) Perfect for those of you who want to p&p and and build it for boosted applications. CURRENT BID PRICE: $85.00 HIGH BIDDER AND WINNER IS NOLIMITRICAN. UPDATE:NOLIMITRICAN WAS A DEADBEAT BIDDER THE HEAD NOW GOES TO THE NEXT IN LINE (DIGGAFLIP)
-AC COMPRESSOR- STARTING BID PRICE: $9.99
- METAL VALVE COVER- CURRENT BID PRICE: $30.00- HIGH BIDDER AND WINNER IS ROCKHOUND124
-Plastic valve cover- CURRENT BID PRICE: $10.99-HIGH BIDDER AND WINNER IS LEGEND921
- P.S. PUMP-STARTING BID PRICE: $9.99
- INTAKE MANIFOLD WITH THROTTLE BODY AND ALL SENSORS ATTACHED-STARTING BID PRICE: $49.99
-CLUTCH AND FLYWHEEL- STARTING BID PRICE: $29.99
-WATER PUMP WITH TEMP SENSOR AND THERMOSTAT- STARTING BID PRICE: $4.99
-TIMING BELT COVER-STARTING BID PRICE: $2.99
-FUEL RAIL WITH INJECTORS- STARTING BID PRICE: $19.99
I have the entire engine so If you want any mounts or other parts not listed then feel free to ask. I may have just what you're looking for.
AGAIN, IF YOU WANT TO SEE PICTURES THEN POST OR PM ME YOUR EMAIL ADDRESS WITH A DESCRIPTION OF WHAT YOU WANT PHOTOGRAPHED.
Last edited by jgoodfella1; Mar 4, 2005 at 01:52 PM.
Registered!!
iTrader: (7)
Joined: Aug 2003
Posts: 903
Likes: 0
From: NEAR HOUSTON,TEXAS
Rep Power: 0 i think you want www.ebay.com
Thread Starter
Registered!!
iTrader: (10)
Joined: Apr 2004
Posts: 465
Likes: 0
From: Southern California
Rep Power: 0
Originally Posted by big_daddy_b_99
i think you want www.ebay.com
Thread Starter
Registered!!
iTrader: (10)
Joined: Apr 2004
Posts: 465
Likes: 0
From: Southern California
Rep Power: 0
Originally Posted by hotrodcivic2004
what about the transmission itself
Thread Starter
Registered!!
iTrader: (10)
Joined: Apr 2004
Posts: 465
Likes: 0
From: Southern California
Rep Power: 0
Originally Posted by cosmo
I'll take the A/C and components. Let me know how much shipped to Canada.
By the way, Make an offer on it 
Thread Starter
Registered!!
iTrader: (10)
Joined: Apr 2004
Posts: 465
Likes: 0
From: Southern California
Rep Power: 0
Originally Posted by 04vic
HEAD COMPLETE WITH V-TEC SOEILNOID
<<<bidding $55>>
<<<bidding $55>>
Last edited by jgoodfella1; Feb 27, 2005 at 09:05 AM.
Thread Starter
Registered!!
iTrader: (10)
Joined: Apr 2004
Posts: 465
Likes: 0
From: Southern California
Rep Power: 0
Originally Posted by legend921
I'll buy the plastic spark plug cover. And I'll also buy the Engine fuse box color because I messed mine up when I painted them.
Thread Starter
Registered!!
iTrader: (10)
Joined: Apr 2004
Posts: 465
Likes: 0
From: Southern California
Rep Power: 0 By the way, I'm in the market for black leather rsx seats or racing seat in the same price range. I may be willing ot work out some sort of trade for local socal people only. I am also looking for a aem pullies at a good price.
Thread Starter
Registered!!
iTrader: (10)
Joined: Apr 2004
Posts: 465
Likes: 0
From: Southern California
Rep Power: 0
Originally Posted by legend921
okay, one more thing this says VTEC on it right and unpainted, if so give me your paypal name and I'll send ya the money. So you don;t have the engine fuse box cover not color?
