B&G S3 forsale **awesome bonus offer**
Thread Starter
ThE FaMiLy SeDaN
iTrader: (21)
Joined: Jul 2002
Posts: 4,221
Likes: 0
From: UCF, Florida, US
Rep Power: 0 
B&G S3 forsale **awesome bonus offer**
B&G True coilovers
Pristine condition
well the story is unveiled......
i bought TEIN flex w/ EDFC the rear bottom bushing was engineered for J-spec sedan w/ disc rears and a wider brackette.. anywho.. i had my B&G sold to a 7thgener but i refunded his money due to my TEIN not being on and B&G not being shippable.. TEIN is sending out the replacement part as we speak so their sendable now.. its an awesome offer so dont pass up the opportunity
anywhoooo... im selling the B&G again
$749.47 firm B&G S3 coilovers used but in pristine condition. comes w/ full manufacturers warantee.. i'll validate from date bought(1year on shocks and lifetime for everything else)
****BONUS offer****BUYER will be offered to purchase a set of wheels for his/her civic or any other vehicle @ cost from me 1 year from purchase date of B&G.. this basically means you pay 750 for B&G now and down the line you wanna buy some 18's for your civic i can save you as much as...500---600--700 on the new wheels all dependent on what you buy. i own a wheel/tire/automotive accessory shop so therfor i pay wholesale cost.. basically in long run your getting B&G for like nuffin plus a set of rims, i carry everybrand made and also some brand that noone else carries much like custom work wheels, SSR, mugen, spoon, etc.
riley wysocki
rijowysock@aol.com
rijowysock =AIM SN
PM me contact me however you please... serious offers can call me 727-439-7456
first w/ cash gets B&G and amazing deal on wheels.
*** disclaimer *** theirs nuthing wrong w/ B&G their in pristine condition im even offering warantee for them, reason deal is "too good to believe" is that i lost my last buyer due to me taking to long so i refunded his $ back.. so now im expediently looking for a new buyer
Pristine condition
well the story is unveiled......
i bought TEIN flex w/ EDFC the rear bottom bushing was engineered for J-spec sedan w/ disc rears and a wider brackette.. anywho.. i had my B&G sold to a 7thgener but i refunded his money due to my TEIN not being on and B&G not being shippable.. TEIN is sending out the replacement part as we speak so their sendable now.. its an awesome offer so dont pass up the opportunity
anywhoooo... im selling the B&G again
$749.47 firm B&G S3 coilovers used but in pristine condition. comes w/ full manufacturers warantee.. i'll validate from date bought(1year on shocks and lifetime for everything else)
****BONUS offer****BUYER will be offered to purchase a set of wheels for his/her civic or any other vehicle @ cost from me 1 year from purchase date of B&G.. this basically means you pay 750 for B&G now and down the line you wanna buy some 18's for your civic i can save you as much as...500---600--700 on the new wheels all dependent on what you buy. i own a wheel/tire/automotive accessory shop so therfor i pay wholesale cost.. basically in long run your getting B&G for like nuffin plus a set of rims, i carry everybrand made and also some brand that noone else carries much like custom work wheels, SSR, mugen, spoon, etc.
riley wysocki
rijowysock@aol.com
rijowysock =AIM SN
PM me contact me however you please... serious offers can call me 727-439-7456
first w/ cash gets B&G and amazing deal on wheels.
*** disclaimer *** theirs nuthing wrong w/ B&G their in pristine condition im even offering warantee for them, reason deal is "too good to believe" is that i lost my last buyer due to me taking to long so i refunded his $ back.. so now im expediently looking for a new buyer
Last edited by rijowysock; Feb 24, 2005 at 02:26 PM.
wow...how bout some custom 15x7.5 and 15x9 work equip 01's those are tasty. lookin for that staggered offset on the other car. my buddy allen got a good deal through bun-san at tee's but was wondering if you can get a better one. please lemme know dude.
Thread Starter
ThE FaMiLy SeDaN
iTrader: (21)
Joined: Jul 2002
Posts: 4,221
Likes: 0
From: UCF, Florida, US
Rep Power: 0 bun-sun at tee's?
whos that.. lol
anywho i could check.. but i really dont wanna call every tom **** and harry to find a price.. just ask bun-san how much his markup is.. he should tell you and i'll get that much off
whos that.. lol
anywho i could check.. but i really dont wanna call every tom **** and harry to find a price.. just ask bun-san how much his markup is.. he should tell you and i'll get that much off
Smuggling bananas and mexicans all for one low price...
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Joined: Aug 2003
Posts: 9,996
Likes: 0
From: Langley AFB, VA
Rep Power: 396 
^^well i imagine ehs a guy who work at tees, one of the biggest importers of real jdm stuff, like Bride seats adn stuff lol
Thread Starter
ThE FaMiLy SeDaN
iTrader: (21)
Joined: Jul 2002
Posts: 4,221
Likes: 0
From: UCF, Florida, US
Rep Power: 0 i think 2003 uses a 16mm bolt..?
so you would have to get a drill bit and widen the hole on B&G has been done by a few members not a big deal.. i would say use 2001 oem bolt.. but then it might move a lil if not fully tightened and that would directly affect camber.. so u could wider holes by 2mm i think it is.
riley
so you would have to get a drill bit and widen the hole on B&G has been done by a few members not a big deal.. i would say use 2001 oem bolt.. but then it might move a lil if not fully tightened and that would directly affect camber.. so u could wider holes by 2mm i think it is.
riley
Thread Starter
ThE FaMiLy SeDaN
iTrader: (21)
Joined: Jul 2002
Posts: 4,221
Likes: 0
From: UCF, Florida, US
Rep Power: 0 nah i dont have pics but their fine. and in perfect workiong condition and look fine/. i live in average temp 75 florida.. where everyday is beautifull no snow.. no ice... no salt, no rust..
riley
riley
Yea... I'm not real sure when taxes for me are going to come back right now either... I'm really not even sure how much I'm getting back.... but if I have enough I"ll let you know... if you still have them for sale...
Thread Starter
ThE FaMiLy SeDaN
iTrader: (21)
Joined: Jul 2002
Posts: 4,221
Likes: 0
From: UCF, Florida, US
Rep Power: 0 about... 3minutes w/ a drill motor and a widening bit
u widen the 4 holes to accept the larger 2003 bolt..
or if you have a camber kit for front.. u just need to widen bottom2 bolts..
on their new ones they used older model and just modded it so its safe... a few members have done so.
riley
u widen the 4 holes to accept the larger 2003 bolt..
or if you have a camber kit for front.. u just need to widen bottom2 bolts..
on their new ones they used older model and just modded it so its safe... a few members have done so.
riley
