FS: (MD) 1991 Chevy Camaro V8 Auto
Guest
Posts: n/a
FS: (MD) 1991 Chevy Camaro V8 Auto
Up for sale is my 1991 RS Camaro V8 (5.0) Automatic.
The car is wrecked in the front. It needs a core support and a passenger side fender reinforcement. I have both fenders, hood, and a front clip from a 1987 Camaro. I think the passenger side control arm needs to be replaced to but I'm not sure. I just know the front passenger wheel is sitting back pretty far.
The car does run well and has approx. 20k miles on the high preformace rebuild. The only thing wrong with the car motor wise is it needs a starter but I will try to have that replaced before selling it. Also the starter does not get a singal from the key, I had to put a push button for the starter. I do not know what caused this.
Mods:
305 bored .030 over with pistons and rods
Crane Cam
Dart performance heads with valves and valve springs
Edlebrock Intake Manifold
Edlebrock Headers
Flowmaster 2.5 cat back exhaust
3.73 rear gears
shift kit
B&M megashifter
performance water pump
Ebiach lowering springs
KYB GR-2 Gas Shocks
new T-Tops with spare set of T-Tops
17" Chrome IROC Z rims
Dunlop SP5000 Z rated tires
tail light covers
tinted windows
$3,500 OBO
I think thats it but if I remember anything else I'll post it. I dont get to vist this forum to often so please email me any questions to kevinnmoosh@yahoo.com . The car is located in Linthicum, Maryland right next to BWI Airport.
For pictures of the car please vist this link:
http://www.angelfire.com/d20/streetdreamsmd/CamaroPics
If someone could post the pics for me I'd appreciate it.
Car will be listed on Ebay in about a week.
__________________
91 RS with fully built 305, 17 inch chrome rally rims, and 135+db stereo!
Car orginally built & owned by - Michael "193" Brown (April 10, 1982 to January 10, 2002)
RIP Mike I love you!
The car is wrecked in the front. It needs a core support and a passenger side fender reinforcement. I have both fenders, hood, and a front clip from a 1987 Camaro. I think the passenger side control arm needs to be replaced to but I'm not sure. I just know the front passenger wheel is sitting back pretty far.
The car does run well and has approx. 20k miles on the high preformace rebuild. The only thing wrong with the car motor wise is it needs a starter but I will try to have that replaced before selling it. Also the starter does not get a singal from the key, I had to put a push button for the starter. I do not know what caused this.
Mods:
305 bored .030 over with pistons and rods
Crane Cam
Dart performance heads with valves and valve springs
Edlebrock Intake Manifold
Edlebrock Headers
Flowmaster 2.5 cat back exhaust
3.73 rear gears
shift kit
B&M megashifter
performance water pump
Ebiach lowering springs
KYB GR-2 Gas Shocks
new T-Tops with spare set of T-Tops
17" Chrome IROC Z rims
Dunlop SP5000 Z rated tires
tail light covers
tinted windows
$3,500 OBO
I think thats it but if I remember anything else I'll post it. I dont get to vist this forum to often so please email me any questions to kevinnmoosh@yahoo.com . The car is located in Linthicum, Maryland right next to BWI Airport.
For pictures of the car please vist this link:
http://www.angelfire.com/d20/streetdreamsmd/CamaroPics
If someone could post the pics for me I'd appreciate it.
Car will be listed on Ebay in about a week.
__________________
91 RS with fully built 305, 17 inch chrome rally rims, and 135+db stereo!
Car orginally built & owned by - Michael "193" Brown (April 10, 1982 to January 10, 2002)
RIP Mike I love you!
Guest
Posts: n/a
maybe willing to trade, I like hatchbacks. Also looking for a decent truck. Car must go ASAP (freaking Home Improvement Assoc. bull crap!!!!) Email: kevinnmoosh@yahoo.com
Guest
Posts: n/a
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
beeemerdude
1st - 5th Generation Civic 1973 - 1995
0
Jul 23, 2015 03:53 PM
Kenji_Shinomori
1st - 5th Generation Civic 1973 - 1995
2
Jun 19, 2015 05:13 PM
twinturbo
General Honda Civic Forum Archive.
3
Mar 22, 2008 02:45 AM
