Rep Power: 0

damn just took my car to honda and found out that the head gasket is busted now they gotta put a new one in for 700..GOD DAMN!! thats mad money shiet...head gasket mess with time wen u try to run at tracks right?

 
Rep Power: 0

cant you get liake a racing one or somthing? it may be the same price or cheaper

 
Rep Power: 0

duno..got factory one

 
Rep Power: 529

What's a head gasket?

 
Rep Power: 0

Why do you need a new head gasket??? That's freakin expensive none-the-less!!! The gasket cost like $35 and the work shouldn't cost no more than $200..But if you take it to Honda, that's what you get

 
Rep Power: 315

honda sevice centers suuuuux

 
Rep Power: 332

diy

 
Rep Power: 0

Just a thin, flimsy seperator that sits between the head and block and keeps compression. Line it with goo and torque the bolts down, simple DIY.

 
Rep Power: 0

i work for saab.
we charge like $350.....that's for saab!
go to a different dealership......

 
Rep Power: 375

Do it yourself. Take the head off and the belts, scrape the head and the deck, gasket sealant, get a thinner gasket to raise ratio...done. Or thicker if you wanna fo F/I.

 
Rep Power: 414

I'd rather stick with my stock gasket for FI. That way if you get a boost spike or something else goes wrong, hopefully your gasket will blow before your engine does.

 
Rep Power: 0

i duno dont care..as long it make the car run good..

 
Rep Power: 0

Dainfamous dont ever buy honda parts unless you have lots of $$$$$$$$$$$

 
Rep Power: 0

honestly dainfamous i wouldve done it for u for 50 bucks not icluding the gasket but hey ure too far unless u want to come over here w a blown gasket lol

 
Rep Power: 0

do u thikn blown gasket is tha cause for me to Run a fuccin up time at the tracks..be i ran a 16.2 with CAI and now i run a 17.1 with SRI Headers and Exhaust..

 
Rep Power: 0

yeah cuz u have basically no compression u need to get that done immediately if u want to avoid ure motor going kablooie lol

 
Rep Power: 0

ohh aight thought so..hope i can make it in the 15's after the gasket is done..haha

 
Rep Power: 0

do u know wat would cause a gasket to be blown?

 
Rep Power: 0

what dealership do you go to? Is it in Philly?

 
Rep Power: 0

nah south jerzey

 
Rep Power: 0

Dainfamous all u got is that intake on there i dont think u will be hitin 15's maybe high 15's



Get whats in the pic then u have a good chance!!

 
Rep Power: 0

high revs like overrevving it, missing shifts, down shifting into redline, hard 7000 rpm shifts lol, overheating, basically having it in redline too much, more than the safe 7200 RPMs, more like 7500+ plus stuff likethat will cause the gasket to blow so it wont blow the motor