Auto to Manual
#153
omgwtfbbq mod.
iTrader: (15)
Join Date: Nov 2004
Location: California
Posts: 4,915
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 287 Re: Auto to Manual
Me and Bob (dopes6070) are doing this swap for another member this weekend. I will take a lot of pictures and there will be a detailed DIY on this once its done. Pull the motor out...its easy as hell and it makes it ALOT easier. Dont be afraid to do it. Just get in there and learn as you go. Sure, you may make a few mistakes, but thats how you learn. You dont need a K20 with a 6 speed to have some fun. Manual is WAY more fun than auto, and the parts are relatively cheap these days. Too bad youre so far away, otherwise I could do it for you. haha.
#157
Super Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: Kauai, Hawaii
Age: 34
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Auto to Manual
bump.
what size hole saw did you guys use when drilling the firewall for the clutch master cylinder
anyone have those pics. im gonna be picking up a donor car soon
anyone know where i can purchase a clutch alignment tool? ill be using the clutch coming off the donor car
what size hole saw did you guys use when drilling the firewall for the clutch master cylinder
anyone have those pics. im gonna be picking up a donor car soon
anyone know where i can purchase a clutch alignment tool? ill be using the clutch coming off the donor car
Last edited by jamesandrew58; 02-15-2008 at 03:01 AM.
#159
Super Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: Kauai, Hawaii
Age: 34
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Auto to Manual
will this alignment tool work on the stock clutch
http://www.advancedclutch.com/142546...I_(D17A1).html
and do the flywheel bolts have 12point heads?
http://www.advancedclutch.com/142546...I_(D17A1).html
and do the flywheel bolts have 12point heads?
#160
Super Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: Kauai, Hawaii
Age: 34
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Auto to Manual
alright ive started on the swap.
can i use the ex engine harness on a lx motor?
i can still use my auto tranny ecu correct?
if i dont use the under dash harness what kind of wiring modifications would i have to do?
can i use the ex engine harness on a lx motor?
i can still use my auto tranny ecu correct?
if i dont use the under dash harness what kind of wiring modifications would i have to do?
#161
Registered!!
Join Date: Mar 2006
Location: Indiana, PA
Age: 39
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 223 Re: Auto to Manual
you have to use a manual ecu, as for the harness, i wouldn't use a different model's, dont know the difference. the under dash harness requires all kind of soldering and stuff because of the reverse lights and stuff from what i have researched. i'm starting my swap soon.
#164
Super Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: Kauai, Hawaii
Age: 34
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Auto to Manual
i just finished my swap and yes i can confirm you don't need a manual ecu or manual engine harness. you just need to reconnect the black box from the auto trans and have it set on park for the car to start, and yes you will be able to go past 5500rpm. but by doing this you will throw a cel for the missing auto tranny sensors. also i haven't got the reverse lights to work. but i will be swapping in a manual engine harness along with the ecu and dash harness to make it a clean swap.
#168
Registered!!
iTrader: (3)
Join Date: Nov 2006
Location: Las Vegas
Age: 40
Posts: 89
Likes: 0
Received 3 Likes
on
2 Posts
Rep Power: 0 Re: Auto to Manual
sorry for bring back and old tread I did this swap and yesterday I changed the engine harness to the manual one as well as the ECU and the ignition because i got the key for the ECU. but now my car doesn't want to start I am still using the Auto Dash harness and found out I need to connect the Clutch Pedal I know I have to ground one but what do I do with the other wire please help.
#169
Re: Auto to Manual
sorry for bring back and old tread I did this swap and yesterday I changed the engine harness to the manual one as well as the ECU and the ignition because i got the key for the ECU. but now my car doesn't want to start I am still using the Auto Dash harness and found out I need to connect the Clutch Pedal I know I have to ground one but what do I do with the other wire please help.
you just loop the two thicker black wires to the clutch pedal sensor! (the top sensor on the clutch pedal)
now i need help on wiring the car to PARK/ to remove the key... i also sent you a pm
#171
Registered!!
Join Date: Jun 2009
Location: charlotte
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Auto to Manual
hi i was wondering if i just needed a manual motor mount or all of the engine motor mounts? and wat r some of the main bolts in need that i cant just re use from my auto crap?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
oneheadlight
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
04-29-2015 11:30 PM
davidpaustin
Mechanical Problems/Vehicle Issues and Fix-it Forum
0
04-29-2015 02:23 PM
C6GrandSport
8th & 9th Generation Civic 2006 - 2015
4
04-25-2015 09:41 PM