Rep Power: 0

ok i just won a bid on ebay for a Dry NOS kit. I know that a few people on this site are running a dry system. So with that being said, can someone give me a DIY or step by step instructions on how to install this? also is it the same way as the NX Express DIY? with a V-AFC can i tune it so more fuel is being added when I spray? can someone tell me how i can do this?

 
Rep Power: 0

if it is a holly "nos" kit, you can call them and they will tell you that it won't work unless you convert it to a direct port kit. with that kit, you do not have any way to add more fuel on that car.

 
Rep Power: 0

damn, you should have waited and got a wet kit. i know theres some people running the dry kits, but imo youre asking for problems. good luck and keep us updated

 
Rep Power: 0

If any, what precautions should i use so i don't screw my motor over? Like any accessories like bottle heater, purge, pressure gauge? here is the kit i got http://cgi.ebay.com/ebaymotors/ws/eB...ME:B:EOAB:MT:6

 
Rep Power: 0

i sprayed 75 dry shot direct port with stock internals .. i used it once and changed the pill back to 50 shot .. !
I used a holley powershot dry kit ... kinda looks the same as that pic on that link....
and for precaution .. hmmmm.. maybe yourself .. control yourself not to be squeezing the juice too much ... and read the n20 FAQ on this forum .. !

 
Rep Power: 0

i have ran 4 bottle of dry nitrous through my d17. Zex kit. I am very happy with it and im runing on stock internals. have been doing mostly a 55 shot. I am pleased at the performance and would recomend the zex dry kit.

 
Rep Power: 0

I have al ready read the Nitrous Thread. I would only Squeeze when i actually race. im not one to squeeze just for the hell of it. I mean im going to have to squeeze to make sure everything is running properly. Also i talked to a friend of mine tonight about no way to adjust the fuel going while i spray he said that the V-AFC and a 8 gauge wire ran to the fuel pump will work just fine.

 
Rep Power: 0

How come you went with the dry kit instead of wet?

 
Rep Power: 0

Because i won it for $167.50. Wouldn't you for that price?

 
Rep Power: 381

Yes, I would have.

 
Rep Power: 0

I dunno..depends as long as you know how to install ti right then that's good..otherwise I heard it isn't very good for you're engine..*shrug* Good to kno though..

 
Rep Power: 0

No Nitrous is good for any motor. but there are steps and directions on how to not detonate your motor. If you follow them and know how to use it properly then you should only face minimal engine wear.