Gonzo.
#2913
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
Start of the weekend wrench extravaganza. This morning's victim was the radiator and grill.
Need to trim a little. It's hittin'
Dremel and done!
Then there was this stupid post on top that had to go.
And everything fit like factory after that!
Because I used the mounting posts attached to the radiator, I didn't have to mess with adding a new foot bracket for the short side. With it secured top and bottom to the raddy cradle, all you need is the one foot on the passenger side.
And yes. The hood latch still fits.
But I put the hood on and saw these two dimples. So it did end up getting damaged in the UPS fiasco. I get to deal with this on Monday now.
Off to Lowes for some bolts and fittings!
Need to trim a little. It's hittin'
Dremel and done!
Then there was this stupid post on top that had to go.
And everything fit like factory after that!
Because I used the mounting posts attached to the radiator, I didn't have to mess with adding a new foot bracket for the short side. With it secured top and bottom to the raddy cradle, all you need is the one foot on the passenger side.
And yes. The hood latch still fits.
But I put the hood on and saw these two dimples. So it did end up getting damaged in the UPS fiasco. I get to deal with this on Monday now.
Off to Lowes for some bolts and fittings!
#2914
Registered!!
iTrader: (6)
Join Date: Feb 2005
Location: Ft. Bragg/Fayetteville, nc
Age: 41
Posts: 1,470
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 249 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
looking good clint!!! gonna install my strut king pedals right now. yo did you get the shift boot collar from?? i can't find one to save my life!!
#2915
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
All right as you know I went to Lowes today to get some shtuff. My garage is not heated. Well. Was not heated. I picked up this little guy, it sure does the trick!
I also needed some fittings, 6mm x 1/2-inch bolts (which they did not have), and some other stuff. I got the fittings I needed and fixed my UK-lashup that I was running for an oil drain off the turbo. It's still a plumbing fitting, but works much better!
And then I worked on the axle back portion of the exhaust. It went pretty smooth. All told I put another 3 hours in on all this stuff today. Here's the in progress of the axleback. Notice that the car is on the ground so I know I won't have any clearance issues.
And with the bumper on. Sits pretty good if I don't say so myself!
And here it is where I'm leaving it for tonight. I ran half of the finish welds on it, but I need to get the garage cleaned up and work on a project for my wife.
For some reason a two-car garage gets messy in a hurry....
#2916
#2917
Registered!!
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (3)
Join Date: Feb 2006
Location: Irvine, Ca
Posts: 2,172
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 266 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
Sleeper exhaust for the win! Looking good as always Foos. Sorry I missed this but what is the purpose of the d16 radiator?
#2918
just a man with a civic
Join Date: Mar 2008
Location: Brandon, FL
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 204 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
its smaller. i assume so he can get his a/c back. lol
Last edited by sicma99ot; 11-22-2008 at 06:40 PM.
#2920
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
Thanks!
Close. It is smaller, which allow more airflow into the engine bay, which is a must (for me) since I'm going from a vented hood to an OEM one. The DP is what allowed me to get my AC back.
Ahh. Nope it's the stocker!
One more update. I hacked up the front bumper to fit the FMIC. I've got one more area to massage and it will fit right in.
Ahh. Nope it's the stocker!
One more update. I hacked up the front bumper to fit the FMIC. I've got one more area to massage and it will fit right in.
#2921
Registered!!
iTrader: (11)
Join Date: Jun 2005
Location: NC
Age: 43
Posts: 2,620
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 257 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
mine looked like that too til i put the piping on....then the foglight hole on the pass side had to be cut a bit...then had to take out the driver side one to match
#2922
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
Yeah, I'm going to play with some things tomorrow to see if I can't make things fit a little better. I've cut about as much as I want to out of the bumper cover.
#2924
Registered!!
iTrader: (6)
Join Date: Feb 2005
Location: Ft. Bragg/Fayetteville, nc
Age: 41
Posts: 1,470
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 249 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
that looks sweet!!! oh yea clint my wife are just waiting to close on our house!!!! hopefully the 19th of dec!!
#2926
You VTEC...I-VTEC
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (8)
Join Date: Apr 2006
Location: Phoenix, AZ
Age: 39
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 232 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
all those sockets are gonna fall when you close that drawer....silly soldiers
#2927
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
I'm not a Marine, I know how to be gentle when I need to be. Opened and closed it several times today and they didn't fall. They are on pegs that keep them upright. I'm a warrant officer. I'm supposed to be smart.
#2928
You VTEC...I-VTEC
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (8)
Join Date: Apr 2006
Location: Phoenix, AZ
Age: 39
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 232 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
pegs eh? tricky tricky!
i didnt know you were a WO... don't even think about telling me to call you sir
i didnt know you were a WO... don't even think about telling me to call you sir
#2930
Registered!!
iTrader: (7)
Join Date: Dec 2004
Location: Belgium
Age: 41
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 243 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
Hehehe Clint at home your the EM2 War Officer, he just keeps on cutting ,crashing, breaking, welding,........... everything looks good btw!
I think routing the IC like that, made you use less piping (maybe helps against some turbo lag) and
alot easier to install
I think routing the IC like that, made you use less piping (maybe helps against some turbo lag) and
alot easier to install
Last edited by DaRk_MauL; 11-24-2008 at 07:55 AM.
#2931
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
I'm thinking I will get better throttle response now that about 2-linear feet of that tubing is gone. But yeah, much easier to fit the bumper this way.
#2932
Registered!!
iTrader: (6)
Join Date: Feb 2005
Location: Ft. Bragg/Fayetteville, nc
Age: 41
Posts: 1,470
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 249 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
shoot me some pix and i'll let you know.. of course i gotta run it by my wife!!!
#2933
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
Hmm...my wife and I have two different ideas on this.
She wants no less than $350 for this pair.
http://s282.photobucket.com/albums/k...foos/Grudunza/
The washer is a base model Kenmore that we got new in '98, used it until '03 and then it went into storage until we moved back to the states. $50 for that, it's in the corner of my garage under some boxes so no pics.
Also in that folder are a couple light fixtures, and some ceiling fans that we are replacing.
I will have an extra dryer as well as soon as I get it repaired (covered under the home warranty FTW!) so I'll be selling the one we're using now (bought same time as the washer) once we get it fixed. Again prolly around $50 for that.
Umm....I've got an extra microwave, you can have that if you need it. I think that's it.
Let me know if any of that will work for you.
She wants no less than $350 for this pair.
http://s282.photobucket.com/albums/k...foos/Grudunza/
The washer is a base model Kenmore that we got new in '98, used it until '03 and then it went into storage until we moved back to the states. $50 for that, it's in the corner of my garage under some boxes so no pics.
Also in that folder are a couple light fixtures, and some ceiling fans that we are replacing.
I will have an extra dryer as well as soon as I get it repaired (covered under the home warranty FTW!) so I'll be selling the one we're using now (bought same time as the washer) once we get it fixed. Again prolly around $50 for that.
Umm....I've got an extra microwave, you can have that if you need it. I think that's it.
Let me know if any of that will work for you.
#2935
You VTEC...I-VTEC
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (8)
Join Date: Apr 2006
Location: Phoenix, AZ
Age: 39
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 232 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
thats a good idea with the oxygen cylinders...i think i am gonna copy that too...been needin a radiator overflow
#2936
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
This is the guy I got them from:
http://shop.ebay.com/merchant/blue-busa
He says he can get more of them.
http://shop.ebay.com/merchant/blue-busa
He says he can get more of them.
#2937
You VTEC...I-VTEC
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (8)
Join Date: Apr 2006
Location: Phoenix, AZ
Age: 39
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 232 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
i did some thinkin after i said that and i think i am going to go with an aluminum water bottle, weld a plate on where the cap is, tap it, powder coat it and use that. then im thinkin about customizing a bike holder as my mount.
#2938
My Pony Princess is the inspiration for my ride.
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Age: 48
Posts: 5,217
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
Foos' Catchcan DIY
The only problem with those is the allie is so thin that there isn't really enough material to tap for the fittings. I made two of them and sold them. Even used the bike bottle holders you've got there.
#2939
You VTEC...I-VTEC
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (8)
Join Date: Apr 2006
Location: Phoenix, AZ
Age: 39
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 232 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
^lol uh yeah...great minds think alike
i was actually gonna do some aluminum welding for the fitting since it is thin
i was actually gonna do some aluminum welding for the fitting since it is thin
#2940
Registered!!
iTrader: (6)
Join Date: Feb 2005
Location: Ft. Bragg/Fayetteville, nc
Age: 41
Posts: 1,470
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 249 Re: Rock-a-bye Sugar - Page 193 - The Speedfoos' Turbo Thread!!
man those are good ideas guys!! hey clint still waiting for my wife to see those pix and i'll get back to you!