lowlife9

Will there be any adverse effects from inverting my tie rods to counteract bump sreer for a 3 1/2 inch drop can you purchase reliable tie rods specifically designed for this purpose ?????????????

djmota

iTrader: (34)

go to clubrsx and look into 0857 rteering rack bracket. its a bolt on mod that will help straighten out your tie rod angles and help with the bump steer problem. Fits the rsx and the 7th gen civic.

lowlife9

cool thanks i really appreciate your info i will research this.

kcari

iTrader: (5)

whats the point of straightening them out?

bomerman19

iTrader: (1)

do to the way the chassis is set up you can't run inverted tie rod ends on a 7thgen civic like you can with the rsx and si. cause when the suspension fully unloads it will slam the tie rod into the frame bending it or snapping it not so pretty. frame support is higher in our cars.

lowlife9

i have seen kits for 2004 civics.here is one for 01-05 civic and 02-06 base model rsx.

Alpha 5

iTrader: (8)

This is interesting..... hhhhmmmmm

bomerman19

iTrader: (1)

I tried to invert mine but the frame got in the way and I could just disaster as soon as I lifted one of the front wheels off the ground. I have to much travel for it to work in my suspension

gearbox

iTrader: (95)

is your car that low causing the tie rods to be angled? how much did you drop it?

lowlife9

im not droped yet my progress comps are in the mail im not sure if im going to go as low as i planed so the tie rods were an option but im thinking 3 inches .