horty222

I want to get some axis spiders 225/40/18 setup. Does anyone have that size setup and will it rub? I want to get them from nextwheels.com and they give you free springs. I will be droping my civic. please advice on any rubbing. I dont want to go with 215/35/18 because i had that setip twice and both times I bent multiple rims.
thanks

krayziebonet4l

iTrader: (2)

depends on how low you'll be dropping your civic. you'll be safe with a 215/40/18 tire and an 1.75 drop all around

chrisleecool

iTrader: (18)

I'm pretty sure it'll rub with over 1'' drop

BaLisTek

iTrader: (7)

I got 215/40/18 and i've only knicked my rims twice in the same spot. I had my rims for over a year with shitty Louisiana roads. If u still want the 225 silvrbreeze has that setup and he's dropped. Look in the louisiana forum and ask him if he is rubbing.

Peace

AzNmiKex215

iTrader: (2)

i think offset plays a major role in this, as well as rim width.

i beleive your rims need to have like 45+ mm offest to properly fit a 8 inch wide wheel with 215. to ride a 225 i think you need like 48mm offest? PM rijowsock.

scatman

iTrader: (22)

dude, you'll be fine.....and its wheelsnext , not next wheels.

born2xLr8

iTrader: (11)

I have 18x7.5 rims with a 42mm offset and 225/40/18 tires. It will occasionally rub when I drive over dips at 70+mph or turning the wheel all the way to make a u-turn.
I'm also lowered 1.75" in the front and 1.50" in the rear.

nickm748

Kinda off topic, will I rub with 215/35/18 40mm offset, with a 2inch drop?

Michalo187

iTrader: (33)

I have the same size and when i turn right it rubs sometimes but like steering wheel completely turned. When people get in the back hits the fenders everybump but other than that they are always fine.

silvrbreez02

iTrader: (4)

i have 225/40-18 with an H&R sport springs drop (about 1.5" all around).....no rubbing.....ever

horty222

thanks for your help

NightRider02

thats the exact tire size i have right now, and my car is lowered about 2.5 inches, and i dont get any rubbing whatsoever

AzNmiKex215

iTrader: (2)

i think it also depends on the width of your rims. I have 18 x 8 rim. I have been told that an 8 inch wide rim will require a +45 mm offset to be perfect.

Rim expert rijowysock has told me i have to go with a 215/35/18 becuase of my width. I have also been told this by two people at tirerack.com ( roger@tirerack.com and Riley@tirerack.com )

What is the offest of your rims? how can you guys run 225/40?

silvrbreez02

iTrader: (4)

not sure offset, but i think my width is only 7.5" (not sure on that either thought)...but i definitely don't rub

of course i'm only lowered like 1.3" (as claimed by H&R), bout 2 fingers gap up front and 1 finger gap in back

i would trust what rijowysock says, he has gone through a lot of wheels, but in my recent experience....no more than a 1.5" drop and that size will work with no problems