can the stock suspension's camber angle be adjusted? (1.5 degrees toe out)
02-15-2012
#1
Registered!!
Thread Starter
can the stock suspension's camber angle be adjusted? (1.5 degrees toe out) can the stock suspension's camber angle be adjusted? (1.5 degrees toe out)
i just want to know if that is possible... i have OEM multi link suspension up front with a 2 1/2 inch drop and sway bar... while the back is stock control arm suspension with fabricated solid steel sway/bouncing tortion bar to lift it an inch higher...just wondering how to adjust the toe out angle and what should i use or do to unscrew it? i was thinking of removing the nut and bolt and putting it back together by welding and reinforcing it... need some suggestions...
i just want to know if that is possible... i have OEM multi link suspension up front with a 2 1/2 inch drop and sway bar... while the back is stock control arm suspension with fabricated solid steel sway/bouncing tortion bar to lift it an inch higher...just wondering how to adjust the toe out angle and what should i use or do to unscrew it? i was thinking of removing the nut and bolt and putting it back together by welding and reinforcing it... need some suggestions...
02-16-2012
#2
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,780
Received 1,440 Likes
on
1,196 Posts
Rep Power: 338 
Re: can the stock suspension's camber angle be adjusted? (1.5 degrees toe out)
...
are you asking camber or toe?...
are you asking camber or toe?...
02-16-2012
#3
Registered!!
Thread Starter
Re: can the stock suspension's camber angle be adjusted? (1.5 degrees toe out) sorry i mean camber angle... lower part of wheel out and upper part in...
02-18-2012
#5
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,780
Received 1,440 Likes
on
1,196 Posts
Rep Power: 338 Re: can the stock suspension's camber angle be adjusted? (1.5 degrees toe out)
you will need to look for adjustable arms for the 6th gen.
it will cost a lot to ship so try to find something more local? Manila is the other side of the globe for most US so look for europe sites?
they gain camber when lowered, as designed, in 6th gen cars
it will cost a lot to ship so try to find something more local? Manila is the other side of the globe for most US so look for europe sites?
they gain camber when lowered, as designed, in 6th gen cars
03-25-2012
#6
Registered!!
Join Date: Mar 2012
Location: Milwaukee Area
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 
Re: can the stock suspension's camber angle be adjusted? (1.5 degrees toe out)
Buy a camber kit (not ebay crap) You can make up for some camber issues with stock components but 1.5 might be a stretch depending on how much off the car is naturally. More than likely the answer is no but you may get lucky. Don't cheap out, suspension is vital to the safety of your car.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
oneheadlight
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
04-29-2015 11:30 PM
deception420
General Honda Civic Forum Archive.
3
12-06-2001 02:31 PM
07, adjust, adjustable, adjustment, camber, civic, civiccamber, front, honda, s2000, silver, spec, stock, suspension, toe
