Bench test a TPS?
#2
If you think a good mechanic is expensive, try hiring a bad one
Re: Bench test a TPS?
Cool story, bro.
Ok. Carry it to the car.
Plug it in to the correct harness connector.
Connect a voltmeter to battery ground, and probably the center wire of the TPS sensor, red/blk.
Turn the key on.
Read the meter.
Work the sensor, watch your meter.
Normal operating range when installed on a throttle body is roughly 0.49v to 4.59v.
FYI, the new TPS should read .49v on the output wire with the throttle closed.
Ok. Carry it to the car.
Plug it in to the correct harness connector.
Connect a voltmeter to battery ground, and probably the center wire of the TPS sensor, red/blk.
Turn the key on.
Read the meter.
Work the sensor, watch your meter.
Normal operating range when installed on a throttle body is roughly 0.49v to 4.59v.
FYI, the new TPS should read .49v on the output wire with the throttle closed.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
amrhamed
Mechanical Problems/Vehicle Issues and Fix-it Forum
5
08-07-2015 11:39 AM
Martinez8o5
Mechanical Problems/Vehicle Issues and Fix-it Forum
10
07-31-2015 10:58 PM
DerbyDad03
Wheels, Tires & Brakes Modifications
3
07-27-2015 11:34 AM
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
8
07-12-2015 11:54 AM