ZSKCivic01

Hey everyone, basically I have a 4G power wire split up into two 8G power wires to power my subwoofer amplifier and front component amplfier. I bought a cheap distrubution block off ebay and im regreting buying it. The holders for the fuse aren't tight enough around the actual fuse so it moves around alot and frequently the amps shut off because they aren't getting enough power. Does anyone know a good distrubtion block that doesn't have this problem? Im thinking of going ahead and buying a stinger digital distribution block off ebay, but it uses regualr fuses that we would normally use in our cars, not the long tube ones. Would those fuses be hard to find in 40 amp fuses?

doubledeuce2k2

iTrader: (20)

if you have a fuse by the battery, don't bother getting a fused block. IMO it's a waste. if you don't have a battery fuse, get one.

shmik1

iTrader: (6)

I have Tsunami for my distro blocks and i've had no probs..

http://www.tsunamionline.com/power_d...ion_blocks.asp
9004 is similar to what I have..

jjj784

pinch the clips closer to hold the fuses tighter