f20c Built 2.5L Engine/Trans/1052u EMS
#1
Registered!!
Thread Starter
Join Date: Nov 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 f20c Built 2.5L Engine/Trans/1052u EMS
I am selling my Built 2.5L Stroker motor. The engine build was started part time upon receiving the rotating assembly from Crower Inc. late October of 2010, and was completely in March of 2011. Since the build I have put a little over 6000 miles on the car. It runs fantastic and I'm more than impressed with the power improvements. Feel free to call or text me with any questions you may have at **contact deleted**. The engine is running strong with absolutely no issues. I have not done any track days, auto-crosses, or any other races aside from 3 passes down the 1/8 mile drag on street tires and the stock clutch. I built it for the purpose of a daily driver with torque and horsepower improvements, nothing more. I am leaving the engine in the car until it sells so buyers may come and view it running. I currently have the car stored indoors for the winter and will not be driving it. Engine and transmission are being sold 100% complete along with ECU, Wiring Harness, and Everything listed below! Once purchased it will take a weekend for me to remove it for pickup or shipping. I will ship it at the buyers expense. Please DO NOT ask me to part the 1052u ECU, I will not part the ECU unless the buyer wishes to purchase the engine without it for a lesser price. In which case, the 1052u will be for sale. Please call or text me at **contact deleted**
Reason for sale: I am selling the engine because I recently got a good deal on an ls1 and t56 and will be swapping them into my s2000.
Price: $5,900 OBO
The buyer will receive everything needed to install the engine in their, or another vehicle. Included in the purchase is all of the following:
Forged Engine:
Crower Crank - March '11 ($1850.00 + $200.00 for balancing)
Crower Rods - March '11 ($670.00)
89mm CP Pistons - March '11 ($550.00)
Darton Sleeves - March '11 ($656.00 + $600.00 for installation)
ARP Headstuds - March '11 ($160.00)
Race Series Preformace Engine Bearings - March '11 ($180.80)
Cometic .05mm Head gasket - March '11 ($94.90)
AEM v2 Intake - August '10 ($300)
AEM 1052u EMS - March '11 ($1500)
Tune on 1052u - March '11 ($500)
OEM Valve Retainers - March '11 ($90.00)
Invidia 70mm Test Pipe ($90.00)
Stage 2 ACT Street Clutch - July '11
ACT Heavy Duty Pressure Plate - July '11
($596.00)
With your purchase you are receiving over $7,500 in parts alone.
Long Block:
Block
Pistons
Rods
Crank
Oil pump
Timing assembl
Head
Cams
Rollers
Etc
All Accessories:
Intake manifold
Fuel rails/injector
Starter
Alternator
Water pump
A/C Compressor
Pulley's
Header
Engine Mounts
Etc
Wiring Harness:
Full Wiring Harness with all sensors and plugs.
Engine Running on 11/24/2011:
http://www.youtube.com/watch?v=zn2cFrfpfCs
Engine being tuned on Dyno:
http://www.youtube.com/watch?v=CD9HeZE1k-Q
RotatingAssembly.jpg
Rods.jpg
Pistons.jpg
Pistons2.jpg
Crank.jpg
Video's of Engine Break-down and First Start up can be found at the following links:
I also can email you the links to these if you would like them. (the website wont allow you more than 2 media links) Email: **contact deleted**
Reason for sale: I am selling the engine because I recently got a good deal on an ls1 and t56 and will be swapping them into my s2000.
Price: $5,900 OBO
The buyer will receive everything needed to install the engine in their, or another vehicle. Included in the purchase is all of the following:
Forged Engine:
Crower Crank - March '11 ($1850.00 + $200.00 for balancing)
Crower Rods - March '11 ($670.00)
89mm CP Pistons - March '11 ($550.00)
Darton Sleeves - March '11 ($656.00 + $600.00 for installation)
ARP Headstuds - March '11 ($160.00)
Race Series Preformace Engine Bearings - March '11 ($180.80)
Cometic .05mm Head gasket - March '11 ($94.90)
AEM v2 Intake - August '10 ($300)
AEM 1052u EMS - March '11 ($1500)
Tune on 1052u - March '11 ($500)
OEM Valve Retainers - March '11 ($90.00)
Invidia 70mm Test Pipe ($90.00)
Stage 2 ACT Street Clutch - July '11
ACT Heavy Duty Pressure Plate - July '11
($596.00)
With your purchase you are receiving over $7,500 in parts alone.
Long Block:
Block
Pistons
Rods
Crank
Oil pump
Timing assembl
Head
Cams
Rollers
Etc
All Accessories:
Intake manifold
Fuel rails/injector
Starter
Alternator
Water pump
A/C Compressor
Pulley's
Header
Engine Mounts
Etc
Wiring Harness:
Full Wiring Harness with all sensors and plugs.
Engine Running on 11/24/2011:
http://www.youtube.com/watch?v=zn2cFrfpfCs
Engine being tuned on Dyno:
http://www.youtube.com/watch?v=CD9HeZE1k-Q
RotatingAssembly.jpg
Rods.jpg
Pistons.jpg
Pistons2.jpg
Crank.jpg
Video's of Engine Break-down and First Start up can be found at the following links:
I also can email you the links to these if you would like them. (the website wont allow you more than 2 media links) Email: **contact deleted**
Last edited by sl33pyriceboi; 11-29-2011 at 07:00 AM.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
beanhead
Archive - Vehicles for Sale/Wanted
1
09-24-2015 12:04 PM
redcloud
I.C.E. (Audio) & Electrical Upgrades
9
09-07-2015 01:45 PM
geforce789
7th Generation Civic 2001 - 2005
1
08-19-2015 06:17 AM