FS: SPC Front camber ($20shipped) - TYC Valeo Retrofit (SOLD) -56kWARN
#1
Registered!!
Thread Starter
iTrader: (15)
Join Date: Feb 2003
Location: Elk Grove/Sacramento/Davis, California, US
Posts: 2,338
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 FS: SPC Front camber ($20shipped) - TYC Valeo Retrofit (SOLD) -56kWARN
[RETROFIT IS SOLD]
[RETROFIT IS SOLD]
[RETROFIT IS SOLD] Camber kit still up for sale!
Up for sale is a TYC Valeo retrofit. I recently bought these off of ebay, and I decided that it was too costly for me to buy the ballasts, bulbs and harnesses. I have never put these on my car. The beam pattern picture is from the previous owner.
These headlights are in pretty good condition, but they will probably need some work on them. As you can see from the beam pattern, it has a sloppy alignment. Also, the valeo projector on the passenger side is not centered. The lense on both side seem to have a little distortion on the top of the lense, but isn't noticible unless you're about 3-4 feet away. Other than that, the rest of the lens looks to be in good condition. No cracks and the mounting points are not broken.
Included are the H7 Adaptors needed to run D2S Bulbs. You will also be given the original wiring harness for the Tyc's.
You CAN use these headlights the way they are, and you'll get the beam pattern in the picture. It still works, but it doesn't look as "pretty." I recommend that you open these up, and align the valeos while they're on the car.
Anyways, here are the pictures
BEAM PATTERN:
RIGHT SIDE:
LEFT SIDE:
H7 Adaptors + Original Wiring harnesses
I'm looking to get $150 for these, and I'll split the cost of shipping This is a pretty good deal because you'll receive the TYC projectors, Valeos, and the H7 adaptors, which would cost a lot more if you were to buy them alone. Plus, you won't need to experiment on your own headlights, which means there won't be downtime for your car.
__________________________________________________ _______
Also up for sale is an 01-02 SPC front camber kit. It fits the struts with the 14mm holes.
I bought this a while back from another member, and I just realized that it won't fit my 03 Civic. I'm looking for $20 shipped for this. This is the exact one in the picture.
[RETROFIT IS SOLD]
[RETROFIT IS SOLD] Camber kit still up for sale!
Up for sale is a TYC Valeo retrofit. I recently bought these off of ebay, and I decided that it was too costly for me to buy the ballasts, bulbs and harnesses. I have never put these on my car. The beam pattern picture is from the previous owner.
These headlights are in pretty good condition, but they will probably need some work on them. As you can see from the beam pattern, it has a sloppy alignment. Also, the valeo projector on the passenger side is not centered. The lense on both side seem to have a little distortion on the top of the lense, but isn't noticible unless you're about 3-4 feet away. Other than that, the rest of the lens looks to be in good condition. No cracks and the mounting points are not broken.
Included are the H7 Adaptors needed to run D2S Bulbs. You will also be given the original wiring harness for the Tyc's.
You CAN use these headlights the way they are, and you'll get the beam pattern in the picture. It still works, but it doesn't look as "pretty." I recommend that you open these up, and align the valeos while they're on the car.
Anyways, here are the pictures
BEAM PATTERN:
RIGHT SIDE:
LEFT SIDE:
H7 Adaptors + Original Wiring harnesses
I'm looking to get $150 for these, and I'll split the cost of shipping This is a pretty good deal because you'll receive the TYC projectors, Valeos, and the H7 adaptors, which would cost a lot more if you were to buy them alone. Plus, you won't need to experiment on your own headlights, which means there won't be downtime for your car.
__________________________________________________ _______
Also up for sale is an 01-02 SPC front camber kit. It fits the struts with the 14mm holes.
I bought this a while back from another member, and I just realized that it won't fit my 03 Civic. I'm looking for $20 shipped for this. This is the exact one in the picture.
Last edited by JCiv03; 10-08-2005 at 11:49 PM.
#5
Registered!!
Thread Starter
iTrader: (15)
Join Date: Feb 2003
Location: Elk Grove/Sacramento/Davis, California, US
Posts: 2,338
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by SVongkasem
Maybe I'll take it... Why won't it fit an '03?
It'll fit your 2001 sedan jarrod. Lmk if you're interested.
#15
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (17)
Join Date: Jan 2003
Location: Ontario
Posts: 9,137
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 355
Originally Posted by doctor
rufus what kinda bulbs and ballasts? I might be intrested in buying them...let me know
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
BootyDo
7th Generation Civic 2001 - 2005
8
06-21-2016 03:45 PM
jzhartman
Mechanical Problems/Vehicle Issues and Fix-it Forum
22
07-23-2015 10:42 PM
ayzan
General Honda Civic Forum Archive.
17
06-30-2002 12:36 PM