Updated Prices! Andy's Partout: Built d17 Block, Wilwood BBK, PNP Type R Gauges
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 
Updated Prices! Andy's Partout: Built d17 Block, Wilwood BBK, PNP Type R Gauges
I've decided to part out the entire car. I'm going back to stock and probably going to sell it eventually. EVERYTHING is up for grabs. Click my sig for my full mod list. I'll update this as much as I can as I go, but I want the word out, everything is up for grabs.
First paypal takes whatever is up for grabs! My paypal is andyman79@gmail.com (no that isn't a type-o, it's 79 not 97). These DO NOT INCLUDE SHIPPING OR PAYPAL FEES!!
Here's what I'm asking...
Powerplant
d17a2 Engine Block: 1,250
Paid: Over 2k between parts and machining costs (not including cost of block)Fully balanced and blueprinted d17a2 block, containing wiseco 8.8:1 pistons and crower forged rods. Engine has less than 1k since rebuild and is 100% pristine.
Gauges
DC5 ITR Gauge Cluster, pre wired: 200
Autometer Electronic Sport Comp Digital Boost Gauge: 100
Autometer Electronic Sport Comp Digital Fuel Press Gauge: 100
Autometer Electronic Sport Comp Digital Oil Press Gauge: 50
Brakes
Wilwood Superlite Big Brake Kit: 800
I paid over 1400 new for these. They include 2 of the bigger superlite calipers (not the cheap dynalite calipers that are in the off the shelf kit), 2 12" slotted and drilled TWO piece rotors, so they can be used on most any Honda by changing the rotor hats, stainless braided lines, and Hawk ferro-carbon pads. These haven't been installed more than a few months and are pristine.
SOLD
VIS CF hood
VIS CF trunk
Progress front 27mm rear sway
Progress rear 24mm rear sway + tie bar combo
Neuspeed black strut bar
DC Sports CS2 strut bar
Kpro w/ebcs & 3.5 bar map
PLX DM-100 + SM AFR (Wideband) with extra o2 sensor
Sparco Torino 2 seats grey/black w/matching rear seats
ARC Titanium Shift Know
DC5 ITR Steering Wheel
Rear rotors
Exhaust Manifold & Dumptube
Tial 35mm Wastegate
Intercooler
Turbo, Downpipe
Full 3” Exhaust
RC 1000cc injectors w/resistor box
Aeromotive Adjustable FPR
Tein SS-P
Tranny
Intake Manifold
PLX DM-100 + SM FP (Oil Pressure)
Volk racing Time attack 16X7 4X100
Here are pics of everything. If you want/need to see pics of anything not shown, please let me know and I'll add them in.
DC5 cluster, gauges
DC5 gauges at night
Underhood shot of everything
Wilwood BBK
First paypal takes whatever is up for grabs! My paypal is andyman79@gmail.com (no that isn't a type-o, it's 79 not 97). These DO NOT INCLUDE SHIPPING OR PAYPAL FEES!!
Here's what I'm asking...
Powerplant
d17a2 Engine Block: 1,250
Paid: Over 2k between parts and machining costs (not including cost of block)Fully balanced and blueprinted d17a2 block, containing wiseco 8.8:1 pistons and crower forged rods. Engine has less than 1k since rebuild and is 100% pristine.
Gauges
DC5 ITR Gauge Cluster, pre wired: 200
Autometer Electronic Sport Comp Digital Boost Gauge: 100
Autometer Electronic Sport Comp Digital Fuel Press Gauge: 100
Autometer Electronic Sport Comp Digital Oil Press Gauge: 50
Brakes
Wilwood Superlite Big Brake Kit: 800
I paid over 1400 new for these. They include 2 of the bigger superlite calipers (not the cheap dynalite calipers that are in the off the shelf kit), 2 12" slotted and drilled TWO piece rotors, so they can be used on most any Honda by changing the rotor hats, stainless braided lines, and Hawk ferro-carbon pads. These haven't been installed more than a few months and are pristine.
SOLD
VIS CF hood
VIS CF trunk
Progress front 27mm rear sway
Progress rear 24mm rear sway + tie bar combo
Neuspeed black strut bar
DC Sports CS2 strut bar
Kpro w/ebcs & 3.5 bar map
PLX DM-100 + SM AFR (Wideband) with extra o2 sensor
Sparco Torino 2 seats grey/black w/matching rear seats
ARC Titanium Shift Know
DC5 ITR Steering Wheel
Rear rotors
Exhaust Manifold & Dumptube
Tial 35mm Wastegate
Intercooler
Turbo, Downpipe
Full 3” Exhaust
RC 1000cc injectors w/resistor box
Aeromotive Adjustable FPR
Tein SS-P
Tranny
Intake Manifold
PLX DM-100 + SM FP (Oil Pressure)
Volk racing Time attack 16X7 4X100
Here are pics of everything. If you want/need to see pics of anything not shown, please let me know and I'll add them in.
DC5 cluster, gauges
DC5 gauges at night
Underhood shot of everything
Wilwood BBK
Last edited by andyman97; Jan 11, 2009 at 06:15 AM.
Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
i call dips on the progress front and rear sways, ill be down in baltimore next weekend if ya want to meet somewhere let me know thanks steve
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
Rear sway is sold, front is still up for grabs. Things are moving along so I recommend hitting me up asap with a pm if you want anything...
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
Do you already have torino 2's? I have no idea how much these big bitches would be to ship....
Joined: Feb 2006
Posts: 2,172
Likes: 1
From: Irvine, Ca
Rep Power: 291 Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
Any chance you are selling your ebrake cables for the discs?
Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
u got extra material like th eone son ur door panels i want that also heheh.. i can send u all stock stuff if u need it rear seats and door panel material
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
No idea what the cost would be for shipping, to be honest. They're light but bulky. I can pick up oem's locally at a junk yard, that's not a big deal to me. Don't have any extra material, it all got used up. If you want them, I'll do 450 shipped (add in 4% for paypal fees) if you want them mang. I paid 650 to the shop that upholstered them plus 400 for the material, **** ain't cheap, lol.
Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
can i get mor epics o fteh rear seats please??? kukixkronicx408@aol.com very interested.. do teh volks come with tires or rims only?
Joined: Feb 2006
Posts: 2,172
Likes: 1
From: Irvine, Ca
Rep Power: 291 Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
can i get mor epics o fteh rear seats please??? kukixkronicx408@aol.com very interested.. do teh volks come with tires or rims only?
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
Clint already paid for it, Tony. Sorry mang. Look at my list and see if there isn't anything else you need though.
Joined: Feb 2002
Posts: 1,036
Likes: 0
From: Rockville, Maryland, US
Rep Power: 306 Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
awesome prices....seen them in person. Pristine.
Re: Massive part out: 500 whp d17, em2, Garrett, Tein, Progress, Motor/Trans, VOLK
dammit Clint!!!!
edit: i found one on the local forum, but it's for an 05-06 rsx. k-pro already in the case, but i've heard things about the 05-06 ecu. will it work in my case or is the chip completely different and no good for a d17?
edit: i found one on the local forum, but it's for an 05-06 rsx. k-pro already in the case, but i've heard things about the 05-06 ecu. will it work in my case or is the chip completely different and no good for a d17?
Re: Updated Prices! Massive part out: 500 whp d17, Motor/Trans, Volks, Sparco, Wilwo
andy, did you have to modify anything to fit those brakes onto the car? or were they a direct bolt on application?
also, where did you purchase those rear rotors?
also, where did you purchase those rear rotors?
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 Re: Updated Prices! Massive part out: 500 whp d17, Motor/Trans, Volks, Sparco, Wilwo
You had to trim the caliper brackets ever so slightly with a dremel, no biggie, took all of 10 minutes. I picked up the rear rotors from fastbrakes as well, but those are gone now.
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 Re: Updated Prices! Andy's Partout: Built d17, Eng/Trans, Volk, Wilwood, PLX, More!
Bump it. Paypals are coming in left and right, I've sold the majority of stuff. Get what's left while it's hawt!
