Parting out car to get an 06 wrx. also selling mp3 player, etc
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331 
Parting out car to get an 06 wrx. also selling mp3 player, etc
Hello, I have decided to part out my car and buy one which I won’t have to mod that much to get to the level of performance I desire, the new car being an 06 wrx wagon (sleeper jdm omg).
I am starting this thread as a heads-up kind of thing. I won’t be able to sell a few of the things off of the car for a little while, until the weather gets better, so i can take it apart. I will also be selling some electronics and stuff that I don’t use. I will have pics up of stuff relatively soon.
Things that I am selling off of the car:
-progress group 27mm front sway bar, with all hardware and oem endlinks dibs to SpoonEM
-progress group 22mm rear sway bar/tie bar/hardware kit (perfect for DXs or VPs that don’t have a stock rear sway) dibs to SpoonEM, hardware sold to Precisn_Tec.
-neuspeed front upper strut tie bar sold to aznboysrfr
-oem honda civic ex stabilizer bar thing (some cars come with this, some don’t. my car didn’t so i bought one online. makes the front end feel stiffer and more solid.)
-koni yellow adjustable shocks, with ground control sleeves. the rears have some rust on them, but most people i have asked about it, they said that it wont affect the performance of them. the struts are drilled out to 16mm for the crash bolts, and the shocks and springs have about 30k miles on both. this will be sold as-is. sold to Fastest_EX
-SPC front and rear camber kit, for all year 7thgens. they sent me the 14mm front bolts and 16mm front bolts. sold to drunkenmagnum
-2004 honda civic ex 15 inch alloy wheels w/falken ziex ze-512 tires (195/60/15) tires have about 70% rear, 50% front left on them. shipping will be about 150 on these, they are in very good condition, one scratch on one of them. these are the 04/05 5-spoke EX wheels, some of the best looking oem honda wheels IMO. on ebay right now, here.
-revo technica short shifter dibs to flipmoderacer02
-acura rsx type s gauge cluster conversion, made by Kazell. this is an entirely plug and play setup, perfect if you dont have a tach. comes with harness, mounting bracket and gauge bezel (custom made fiberglass). there is only like 4-5 of these floating around, probably looking for about 300 for this setup. can only be used in 01-02 dx/lx/ex, 03 dx, and 04-05 dx/vp sold to TheSmuggler
-honda civic si (ep3) leather shift ****
-acura rsx-s stock shift ****
-Xtec 6000k HID kit, 9006 bulbs. 180 shipped
-AEM cold air intake piping/parts. I think this needs a bracket for the transmission, then you are good to go.
-Tanabe Super Racing Medallion stainless exhaust system, with extra pipe for DX/LX. this fits all trim levels besides HX, and cost of it new according to tanabe is 780 with the extra pipe. 200 plus shipping
Other stuff that I’m selling:
-Rio forge 256mb mp3 player, with sd card slot.
this is a refurb i bought from woot.com for 45 dollars a while back. I don’t use it much, ill sell it if someone wants it. still under warranty from Rio.
-Creative Zen Micro 5gb black mp3 player, with headphones, usb cable, manual, etc. I don’t use this much also, looking for 130 shipped on this. pending to a friend of mine
-Shure e3c in-ear headphones. these things are absolutely amazing, comes with like 8 pairs of tips that haven’t been used yet. retail is 180, asking 120 for these. still under warranty until october 2007.
That’s all I have for now, pics will be up within a few days. thanks for looking.
If you call dibs on something and don't reply within a day, it goes to the next person.
I am starting this thread as a heads-up kind of thing. I won’t be able to sell a few of the things off of the car for a little while, until the weather gets better, so i can take it apart. I will also be selling some electronics and stuff that I don’t use. I will have pics up of stuff relatively soon.
Things that I am selling off of the car:
-progress group 27mm front sway bar, with all hardware and oem endlinks dibs to SpoonEM
-progress group 22mm rear sway bar/tie bar/hardware kit (perfect for DXs or VPs that don’t have a stock rear sway) dibs to SpoonEM, hardware sold to Precisn_Tec.
-neuspeed front upper strut tie bar sold to aznboysrfr
-oem honda civic ex stabilizer bar thing (some cars come with this, some don’t. my car didn’t so i bought one online. makes the front end feel stiffer and more solid.)
-koni yellow adjustable shocks, with ground control sleeves. the rears have some rust on them, but most people i have asked about it, they said that it wont affect the performance of them. the struts are drilled out to 16mm for the crash bolts, and the shocks and springs have about 30k miles on both. this will be sold as-is. sold to Fastest_EX
-SPC front and rear camber kit, for all year 7thgens. they sent me the 14mm front bolts and 16mm front bolts. sold to drunkenmagnum
-2004 honda civic ex 15 inch alloy wheels w/falken ziex ze-512 tires (195/60/15) tires have about 70% rear, 50% front left on them. shipping will be about 150 on these, they are in very good condition, one scratch on one of them. these are the 04/05 5-spoke EX wheels, some of the best looking oem honda wheels IMO. on ebay right now, here.
-revo technica short shifter dibs to flipmoderacer02
-acura rsx type s gauge cluster conversion, made by Kazell. this is an entirely plug and play setup, perfect if you dont have a tach. comes with harness, mounting bracket and gauge bezel (custom made fiberglass). there is only like 4-5 of these floating around, probably looking for about 300 for this setup. can only be used in 01-02 dx/lx/ex, 03 dx, and 04-05 dx/vp sold to TheSmuggler
-honda civic si (ep3) leather shift ****
-acura rsx-s stock shift ****
-Xtec 6000k HID kit, 9006 bulbs. 180 shipped
-AEM cold air intake piping/parts. I think this needs a bracket for the transmission, then you are good to go.
-Tanabe Super Racing Medallion stainless exhaust system, with extra pipe for DX/LX. this fits all trim levels besides HX, and cost of it new according to tanabe is 780 with the extra pipe. 200 plus shipping
Other stuff that I’m selling:
-Rio forge 256mb mp3 player, with sd card slot.
this is a refurb i bought from woot.com for 45 dollars a while back. I don’t use it much, ill sell it if someone wants it. still under warranty from Rio.
-Creative Zen Micro 5gb black mp3 player, with headphones, usb cable, manual, etc. I don’t use this much also, looking for 130 shipped on this. pending to a friend of mine
-Shure e3c in-ear headphones. these things are absolutely amazing, comes with like 8 pairs of tips that haven’t been used yet. retail is 180, asking 120 for these. still under warranty until october 2007.
That’s all I have for now, pics will be up within a few days. thanks for looking.
If you call dibs on something and don't reply within a day, it goes to the next person.
Last edited by mandangalo; Feb 4, 2006 at 08:17 PM.
dibs on the progress front sway and progress rear sway/tie bar combo!!!
also, ill take dibs on the rsx gauge cluster...as long as youre not asking too much!!
also, ill take dibs on the rsx gauge cluster...as long as youre not asking too much!!
Last edited by spoonEM; Jan 10, 2006 at 03:50 PM.
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by spoonEM
dibs on the progress front sway and progress rear sway/tie bar combo!!!
also, ill take dibs on the rsx gauge cluster...as long as youre not asking too much!!
also, ill take dibs on the rsx gauge cluster...as long as youre not asking too much!!
send me some pictures of AEM cold air intake to mlodyrzpl@wp.pl
and how much???
and how much???
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by mateusz
send me some pictures of AEM cold air intake to mlodyrzpl@wp.pl
and how much???
and how much???
Registered!!
iTrader: (6)
Joined: Jun 2005
Posts: 980
Likes: 0
From: Sacramento, California
Rep Power: 0 i think wagons are the shiznit...
especially Bimmer wagons and WRX wagons...
good luck to you.
bump for good seller...
oh.. i might be interested in the headphones in 2-3 months....
especially Bimmer wagons and WRX wagons...
good luck to you.
bump for good seller...
oh.. i might be interested in the headphones in 2-3 months....
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by aznboysrfr
works for me ... what's your paypal address?
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by jbrown59
Ill take the creative zen 5gb mp3 player, 100 shipped
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331 for the cluster, the way the harness is wired right now is so that it will work with 01-02 dx/lx/ex, and 04-05 dx/vp. maybe 03 dx too.
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by drunkenmagnum
i want the camber kit! i really need the rear!
the rsx gauge cluster would be nice too!
the rsx gauge cluster would be nice too!
AHhh.. looks like my old rsx-s cluster conversion will trade hands again. And ohh look, its my old SI ****. HAHA
Bump for a buddy in need.
dam its been too long since i posted here. Does anyone remember me? ( Not that I was popular or anything)
Bump for a buddy in need.
dam its been too long since i posted here. Does anyone remember me? ( Not that I was popular or anything)
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by BaLisTek
AHhh.. looks like my old rsx-s cluster conversion will trade hands again. And ohh look, its my old SI ****. HAHA
Bump for a buddy in need.
dam its been too long since i posted here. Does anyone remember me? ( Not that I was popular or anything)
Bump for a buddy in need.
dam its been too long since i posted here. Does anyone remember me? ( Not that I was popular or anything)
Smuggling bananas and mexicans all for one low price...
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Joined: Aug 2003
Posts: 9,996
Likes: 0
From: Langley AFB, VA
Rep Power: 397 omg plllleeeassseeeee if he dosen't take the gauge cluster I will.... omg I need it so bad :x =*(
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by fidencio74
How much for the progress sway set shipped to 92029?
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by TheSmuggler
omg plllleeeassseeeee if he dosen't take the gauge cluster I will.... omg I need it so bad :x =*(
Originally Posted by Michalo187
I call 2nd dibs on the rsx gauges
Thread Starter
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 331
Originally Posted by aznboysrfr
mandangalo: I paypal'ed you for the Neuspeed bar
I don't mean to jack your thread, but if anyone wants a DC5 RSX/Integra Type R gauge cluster conversion including plug and play harness, I have one for sale. It's been sitting in my garage for like 6 months now. I'll sell it for $250 shipped. please PM me if you're interested
edit: mand: random piece of info, but your b-day is a day before mine haha
I don't mean to jack your thread, but if anyone wants a DC5 RSX/Integra Type R gauge cluster conversion including plug and play harness, I have one for sale. It's been sitting in my garage for like 6 months now. I'll sell it for $250 shipped. please PM me if you're interested
edit: mand: random piece of info, but your b-day is a day before mine haha
