MooZleZ

Hi, I'm thinking about getting 2 new Rockford Fosgate speakers 6"x9" and I was thinking about these two, dont know which are best.

T1693C
Configuration: 3-Way Full-Range
Midrange Diameter: 6"x9"
Midrange Depth: 3"
Tweeter Diameter: .5"
Frequency Response: 40Hz - 22kHz
Power Handling: 110 Watts RMS 220 Watts Peak
Crossover High-Pass (HP): 12dB
Sensitivity: 90dB @ 1 watt/1 meter
Grilles Included: Yes
Mounting Hardware: Yes
Shipping Weight: 9.9 Lbs.
(4.5 Kg.)

P1692S
Configuration: Twin Drive Full-Range
Midrange Diameter: 6"x9"
Midrange Depth: 3.1"
Tweeter Diameter: .75"
Frequency Response: 50Hz - 22kHz
Power Handling: 60 Watts RMS 120 Watts Peak
Crossover Low-Pass (LP): 12dB
High-Pass (HP): 12dB
Sensitivity: 90dB @ 1 watt/1 meter
Grilles Included: Yes
Mounting Hardware: Yes
Shipping Weight: 9.8 Lbs.
(4.4 Kg.)


There's also the difference that the Punch P1692S is a Component System and the T1693C isnt.

which ones are better ? cuz I can get em both for same price atm.

Thanks,

Syke Fu

The specs look almost the same, except for the RMS rating. Whichever one you get, be sure to get an amp that will match the RMS rating.

MooZleZ

well I have an amp that'll do the job 4*250W RMS so that'll do

but I was wondering what the difference in performance is between a component set and a composite set.

MooZleZ

I ended up getting the P1692S speakers, cuz my m8 who owns a local car audio shop said they would sound better than them cuz they have them tweeters and stuff onnit and the others dont.

so I installed them and they sound nice now I ordered some front speakers to go with em. also Rockford Fosgate ofc.