honvic

I have an Australian right hand drive Honda Civic 1993 Sedan GL 1.5 with computer controlled carby that is blowing black smoke and running bad. Has had a major service recently. I have been advised to check for error codes produced by the comp in order to figure out whether it could be the O2 sensor causing the issues.

I have got the service manual and tutorials online but I can not figure out which cable is the Diagnostic Check Connector for checking for error/fault codes.

The pictures and diagrams I have do not match what I am seeing.

Anyone know what cable to look for, etc.

Here are the pics to help:
Passenger side, underneath. Theres these connectors attached to the metal frame. I am thinking maybe it could be the brown plug?


Here is a close up of the connectors
Uploaded with ImageShack.us


This connector is located underneath the glove box but more to the center of the car


There is a bunch of cables on the underneath of the driver side where the fuses are. Any of them the Diagnostic connector?


Thank you

ccgoodwin

its the brown plug under the pasnger glove box take the two wires and conect a paperclip as a jumper wire and watch the number of times the ecu light blinks.....

http://clubeg6.com/forum/viewtopic.php?f=13&t=26797