Manually change air mix
05-29-2018
#1
Registered!!
Thread Starter
Join Date: May 2018
Age: 31
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 
Manually change air mix
Hi, I'm wondering if there is a way to manually move the vents to deactivate the windshield deffog.
when i turn on my ac you can see condensation on the lowest part of the front windshield. The mixer/blend motor is broken so the buttons to recirculate and the selector to face, foot, etc its not working.
so i want to manually adjust the vents so just throw air for the top vents (face position) and not to the windshield.
when i turn on my ac you can see condensation on the lowest part of the front windshield. The mixer/blend motor is broken so the buttons to recirculate and the selector to face, foot, etc its not working.
so i want to manually adjust the vents so just throw air for the top vents (face position) and not to the windshield.
05-29-2018
#2
OF top 99.5% creator (Formerly of the Puffinblunts variety)
Re: Manually change air mix
Blend door actuator is an easy fix. However, if you want to do it manually try removing the connection rod from actuator arm, set to defrost vent and see if the vent door will stay in place. Possibly, tape it in place?
05-29-2018
#4
If you think a good mechanic is expensive, try hiring a bad one
Re: Manually change air mix
The mixer/blend motor is broken
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
TonnyHegger
General Honda Civic Forum Archive.
11
01-31-2002 02:02 PM
