YOMAN

I got me 07 Honda EX 4 dr and loving it...

I replaced all bulbs to SIlverstars and i ran into problem, its on passenger side, i cant reach 9006 bulb cuz of power steering is in the way.

How did you guys replace it ?? remove power steering huh?? will it hurts aluminun tubes (ie, bend etc) ??

Thanks!
YOMAN!

aesop

I would like to know how to replace the passenger side headlight bulbs too. My manual only show how to replace the driver side headlights. Odd since the passenger side headlights do burn out.

electric130

iTrader: (44)

on the 7th gen, you have to pull the reservoir up out of the way. don't know if yours is like that. a couple clear pics would help.

YOMAN

ON pass. side, i unscrew the bolts that hold box ( i think brake box) with few alumiun tubes then pull toward driver (go easy on it) then other hand go in there to remove it then plug it in.

YOMAN!

silver06civ

on the pass side of my 06 2door if u pull the top half of the windshield washer resivor out then u can get into the area to get the bulbs out easier, its a pain, they build a car around a motor nowadays

electric130

iTrader: (44)

you wanna see PITA? come work on an F-16 with me for a day! them bitches SUCK!!! i've got the scars to prove it!

cyager

I put silverstar ultras in my 06 civic...... on driver side just unscrew the battery mounting rod, tilt battery, then resivoir pulls straight up and out. This will give you great access. Passenger side, crank wheels all the way to one side... pull out plastic wheel housing cover out about 5 inches(it wont break, it bends) then you have lower access to headlights.

mysterymanmarty

has anyone switched fromt the silverstars to the silverstar premiums , any real difference , i couldnt find the ultras so the went with the regular

20strong

I changed mine when I pulled the heads out to clear them but I am using premiums and the light is great I love it.