Rep Power: 355

i want to cler headlights without removing bumper, i know how to if i can know what a fender well is, i have to remove the screws on it, so were is it?

 
Rep Power: 0

You can do it without removing the bumper? Taking the bumper off isn't that hard, it took me about 15 min the first time following the directions, I imagine it would make it a lot easier to just take it off, but whatever... the fenderwell is the the area surrounding the wheel, i.e. the really dirty part. Its held on by one bolt/screw and about 3-4 clips. Good luck

 
Rep Power: 319

here you go, the red circles are the clips/screws you need to remove to pull the bumper forward, and the green circles show the location of the 4 bolts that hold the headlight housing to the car.

i'm in the christmas spirit [IMG]i/expressions/face-icon-small-smile.gif[/IMG]

 
Rep Power: 414

Seriously, removing the bumper is so easy. I was so nervous when doing it. But I was amazed at how easy it was.

 
Rep Power: 0

Yeah your going to need to remove the bumper to get the headlight housings out. Its not hard at all though.

Mex pointed out all the places you need to remove the screws at, so it should be a piece of cake.

 
Rep Power: 355

thanks a million man, that pic mnakes it soo much easier, it should be added to the diy, mex your the best

 
Rep Power: 0

Dude, that bumper is like 3/4 of the way off, who cares if you take it off or not, it's just a couple of push in tabs on the bottom and your done!!
[IMG]i/expressions/face-icon-small-tongue.gif[/IMG]