Rep Power: 0

ok, all i can find is how to get behind the middle vents. but i am wanting to know how to get behind the two outside vents (the ones nearest the doors) b/c i have some 3 inch streetglow neon i am wanting to install there, so i'd greatly appreciate some help on how to remove the faces of the vents.

 
Rep Power: 0

Grab yourself a flathead screwdriver and a cloth/towel. Put the cloth over the head of the screwdriver and GENTLY push it behind the vent on one side, near the top or bottom. The vents are only held on by clips and if you gently pry near one corner, you can get your fingertips behind it and simply pull. Just be careful with the screwdriver (that's what the cloth is for), b/c too much force can dent the dash and one slip could scratch it.

 
Rep Power: 0

that would look so tight i gota do it for both my rides how much for the street glow

 
Rep Power: 0

there about 50 dollars for a pair.

 
Rep Power: 0

just yank it really hard [IMG]i/expressions/face-icon-small-smile.gif[/IMG]

i didn't use neons for the light in the vents, instead i used led