The myth of the 80 shot N2O, feasible?
Thread Starter
Registered!!
Joined: Oct 2001
Posts: 197
Likes: 0
From: South Fl, Florida, US
Rep Power: 0 
The myth of the 80 shot N2O, feasible?
i was just wondering about this today, how the hell do some kids run a 80 shot with no internals or anything, just stock
!! i dont understand the concept of the double fogger, (two 40shot foggers next to each other) how is this diffrent from one fogger with an 80 shot?? how is all this feasible?? thanks [IMG]i/expressions/beer_yum.gif[/IMG][IMG]i/expressions/beer_yum.gif[/IMG]
P.S. anyone knows what a Z28 cammero runs the 1/4 in?
!! i dont understand the concept of the double fogger, (two 40shot foggers next to each other) how is this diffrent from one fogger with an 80 shot?? how is all this feasible?? thanks [IMG]i/expressions/beer_yum.gif[/IMG][IMG]i/expressions/beer_yum.gif[/IMG]P.S. anyone knows what a Z28 cammero runs the 1/4 in?
<< Well, a stock 98-02 CAMARO probably runs somewhere between 13.4-13.8 >>
no way thats got to be way to fast. id say high 14's low 15's
and it is no2
(this is going to turn in to a thread about camaros)
<< no way thats got to be way to fast. id say high 14's low 15's >>
Im sorry, but if you dont know what your talking about, dont post it. New GT Mustangs run 14.1 in the Quarter. Trust me, they will do under 14 seconds. Go read any magazine you want, they will all say what Im saying.
Thread Starter
Registered!!
Joined: Oct 2001
Posts: 197
Likes: 0
From: South Fl, Florida, US
Rep Power: 0 
Supermex and Pinkytoe both on this site, are running an 80 shot, forget the camerro question just someone please answer the NO2 questions please [IMG]i/expressions/beer_yum.gif[/IMG]
Registered!!
Joined: Sep 2001
Posts: 1,512
Likes: 0
From: Portland,OR / Vancouver,WA, Washington, US
Rep Power: 0 
I dont know about 80...thats steep.....
delacmpous is running (was) a 75 shot.....NX....
The NX 50 shot puts you @ 200+ torque,....any much more than that and I don't know how long you'll be running a 80 or 75 shot.......delacampous has been runnning 75 for quite a while though......
He also know alot about what he is doing.
Personally I would'n run over 50. that much torque would break something.
[IMG]i/expressions/face-icon-small-wink.gif[/IMG][IMG]i/expressions/face-icon-small-wink.gif[/IMG][IMG]i/expressions/face-icon-small-wink.gif[/IMG][IMG]i/expressions/face-icon-small-wink.gif[/IMG]
delacmpous is running (was) a 75 shot.....NX....
The NX 50 shot puts you @ 200+ torque,....any much more than that and I don't know how long you'll be running a 80 or 75 shot.......delacampous has been runnning 75 for quite a while though......
He also know alot about what he is doing.
Personally I would'n run over 50. that much torque would break something.
[IMG]i/expressions/face-icon-small-wink.gif[/IMG][IMG]i/expressions/face-icon-small-wink.gif[/IMG][IMG]i/expressions/face-icon-small-wink.gif[/IMG][IMG]i/expressions/face-icon-small-wink.gif[/IMG]
<<
<< Well, a stock 98-02 CAMARO probably runs somewhere between 13.4-13.8 >>
no way thats got to be way to fast. id say high 14's low 15's
and it is no2
(this is going to turn in to a thread about camaros) >>
no its n2o, no2 is nitrous dioxide
I am currently running a 75 shot of n20 with my nx wet kit! i amarunning 2 degrees cooler plugs and i am not running a bottle heater! I check my plugs after each drain of the tank or after every 10lbs! I would only suggest running a 50 shot wet with maybe about 900-1000 lbs of bottle pressure! Gonna need a air/fuel ratio guage a good one too { not an autometer} they are known to be off 10-20 degrees! And i suggest never spraying before 3000 rpms to be safe and i would also recommend not spraying in 1st gear or 5th gear! i definatley recommend a new clutch mines feelin' spongy! And NEVER! hit the rev limiter while spraying! Dakota
ya im running an 80- stock plugs (i wasent about to put zex plugs in- i saw what they did to an s2000 motor- one of the contacts broke off- zex is paying for the motor- im not going through that) and 1/2 a degree retard- tahts all you need to hit 14.2
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Touge
Canada East
0
Sep 23, 2015 11:19 PM
Touge
Ottawa
0
Sep 23, 2015 11:14 PM
KamikazeKunze
8th & 9th Generation Civic 2006 - 2015
3
Aug 30, 2015 10:38 AM
Star1967
Electrical, Wiring, and In Car Entertainment
4
Jul 14, 2015 09:43 PM



