FS: Grey's Endlinks (no longer for sale)
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 
FS: Grey's Endlinks (no longer for sale)
Grey's endlinks are an alternative to the Hotchkis endlinks which sell for approximately $173.81 shipped. People have been having problems with their stock endlinks breaking, and these endlinks solve that problem. I have heard of people breaking their stock rear endlinks, and even their stock front endlinks with nothing more than the stock sway bars! Although most people who have broken their endlinks have done so with upgraded sway bars.
This is the latest design which is more corrosion resistant than previous designs, has a higher degree of articulation, is lighter, and is able to withstand a higher load than the previous versions.
I typically have 4 sets of endlinks in stock, and I order more as soon as I run out. This means that it can take as little as 2-3 days for the endlinks to arrive at your doorstep after I receive payment, or it can take up to two weeks for them to get there. In rare cases it takes me a little bit longer to ship them out due to Holidays, B-Days, etc. Please be patient; you WILL get them.
Buy with confidence. My PayPal account has been alive since May of 2001 and I have 248+ Verified Buyers!
These endlinks will fit the 2001+ Civic (EM2), 2002+ Civic Si (EP3), 2006+ Civic (FG or FA), and the 2002+ RSX (DC5)!
Here are the direct links to PayPal payments...
Kit 2EL: For any aftermarket or OEM sway bar. (front or rear)
- Two endlinks priority shipped to anywhere in the USA. $54.95
- Two endlinks priority shipped to anywhere in Canada. $59.95
Kit 4EL: For any set of aftermarket or OEM sway bars. (front and rear)
- Four endlinks priority shipped to anywhere in the USA. $94.95
- Four endlinks priority shipped to anywhere in Canada. $99.95
The Following kits (2EL-P, and 4EL-P) are for all Civics without a stock rear sway bar. For example, 2001 LX's sold in the US would fit in to this category. You would have to buy the Progress mounting kit to be able to install a rear sway bar. I produce endlinks for that kit and to my knowledge am the only one to offer aftermarket endlinks for Civics without stock rear sway bars.
Kit 2EL-P: For any rear sway bar (aftermarket or OEM) with the Progress mounting kit.
- Two endlinks priority shipped to anywhere in the USA. $54.95
- Two endlinks priority shipped to anywhere in Canada. $59.95
Kit 4EL-P: For any set of aftermarket or OEM sway bars with the Progress mounting kit.
- Four endlinks priority shipped to anywhere in the USA. $94.95
- Four endlinks priority shipped to anywhere in Canada. $99.95
If you would like to purchase my endlinks with the use of a check or money order, then please PM me about it. I will then give you all of the information you need to make a purchase. Thank you.
This is the latest design which is more corrosion resistant than previous designs, has a higher degree of articulation, is lighter, and is able to withstand a higher load than the previous versions.
I typically have 4 sets of endlinks in stock, and I order more as soon as I run out. This means that it can take as little as 2-3 days for the endlinks to arrive at your doorstep after I receive payment, or it can take up to two weeks for them to get there. In rare cases it takes me a little bit longer to ship them out due to Holidays, B-Days, etc. Please be patient; you WILL get them.
Buy with confidence. My PayPal account has been alive since May of 2001 and I have 248+ Verified Buyers!
These endlinks will fit the 2001+ Civic (EM2), 2002+ Civic Si (EP3), 2006+ Civic (FG or FA), and the 2002+ RSX (DC5)!
Here are the direct links to PayPal payments...
Kit 2EL: For any aftermarket or OEM sway bar. (front or rear)
- Two endlinks priority shipped to anywhere in the USA. $54.95
- Two endlinks priority shipped to anywhere in Canada. $59.95
Kit 4EL: For any set of aftermarket or OEM sway bars. (front and rear)
- Four endlinks priority shipped to anywhere in the USA. $94.95
- Four endlinks priority shipped to anywhere in Canada. $99.95
The Following kits (2EL-P, and 4EL-P) are for all Civics without a stock rear sway bar. For example, 2001 LX's sold in the US would fit in to this category. You would have to buy the Progress mounting kit to be able to install a rear sway bar. I produce endlinks for that kit and to my knowledge am the only one to offer aftermarket endlinks for Civics without stock rear sway bars.
Kit 2EL-P: For any rear sway bar (aftermarket or OEM) with the Progress mounting kit.
- Two endlinks priority shipped to anywhere in the USA. $54.95
- Two endlinks priority shipped to anywhere in Canada. $59.95
Kit 4EL-P: For any set of aftermarket or OEM sway bars with the Progress mounting kit.
- Four endlinks priority shipped to anywhere in the USA. $94.95
- Four endlinks priority shipped to anywhere in Canada. $99.95
If you would like to purchase my endlinks with the use of a check or money order, then please PM me about it. I will then give you all of the information you need to make a purchase. Thank you.
Last edited by gearbox; Jun 18, 2011 at 07:45 AM.
Proud to be a civic owner
iTrader: (5)
Joined: Jul 2004
Posts: 1,847
Likes: 0
From: Daly City, CA
Rep Power: 0 how long are you going to have this deal??? i might need it because of the noise coming from the front suspension after i installed tein basic... i'm going to have the auto shop check it for me first... so if i do need new endlinks, i'm definitely buying from you for such a great price!
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 330 
since the prices are the same for cars with oem sways, and cars without oem sways, what exactly is the difference between them?
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419
Originally Posted by es2k2
how long are you going to have this deal??? i might need it because of the noise coming from the front suspension after i installed tein basic... i'm going to have the auto shop check it for me first... so if i do need new endlinks, i'm definitely buying from you for such a great price!
Originally Posted by CivicMexicano
do you know if these would fit a 2000 Si?
Originally Posted by mandangalo
since the prices are the same for cars with oem sways, and cars without oem sways, what exactly is the difference between them?
Last edited by Grey; Nov 2, 2005 at 10:22 AM.
Joined: Jan 2005
Posts: 7,035
Likes: 0
From: Spokane, Washington
Rep Power: 330 ah, i know what you mean, just didnt think of it in the first place, since i haven't dealt with a 7thgen with stock rear sway yet.
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Just letting everyone know that theprophet36's endlinks were shipped out and received on Mar. 29th. I'm still around and I'm still selling the endlinks. 
Search and Learn
iTrader: (34)
Joined: May 2002
Posts: 14,004
Likes: 0
From: 909, Socal
Rep Power: 432
Originally Posted by Grey
Just letting everyone know that theprophet36's endlinks were shipped out and received on Mar. 29th. I'm still around and I'm still selling the endlinks.
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by MrXclusivE
Doesn't the progress mounting kit (adapter kit) come with endlinks?!?!?
Originally Posted by Karumba
Yes , but not everyone buys that as it is only truly required by 01 DX/LX models. They try using their stock endlinks which won't hold up normally. Though in any event, Grey's endlinks looked a lot more durable than the ones included in the Progress kit. Never did have a chance to try them out though
Registered!!
Joined: Jul 2006
Posts: 3
Likes: 0
Rep Power: 0 
Originally Posted by misterpho7
Email him to get response. I just got into contact with him last week for some parts for a shortshifter.
Hopefully I get these soon, I have an ITR sway bar I must install
