DIY cluster swap 2003 - 2004 dx also available for other models
#123
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 auto into manual sure. you will have the P R N D part there but it just wont work right obviously. everything else should work.
#125
sweet
will there be any change to the wiring other than what is already shown here?
Aslo is there any thing diffrent with doing the swap on a canadian car?
will there be any change to the wiring other than what is already shown here?
Aslo is there any thing diffrent with doing the swap on a canadian car?
Last edited by bikeman185; 02-26-2006 at 10:23 PM.
#126
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 doubtful. canada just has kph instead of mph. its the same car. only problem you might run into is the tach wire but it should be there. also depending on the cluster, you may have a light coming on for abs since your car doesn't have it. you can just stick some e-tape behind the icon tho. thats what i did for some of mine.
#127
Since 2002 Baby!
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (4)
Join Date: Jul 2002
Location: 650 (SC_RWC) CA
Age: 43
Posts: 4,209
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 307 What's the Wire for the ABS, cause the light is on, but I don't have ABS. at least I don't think so. 2002 DX coupe.
#128
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 i'm not sure but you could check the electrical service manual if its not in the diy. or easier just put electrical tape behind the icon.
#130
rocking the dx w/ vtec
iTrader: (2)
Join Date: Mar 2004
Location: Phila
Age: 42
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Can some one with a 2003 - 2005 EX w/ ABS tell me what pin location on the blue connector the Blue/Red wire is going into. That is your ABS light wire.
I cant find anyone with a manual to help me find it, but anyone with a 03-05 ex w/ abs can just pull out the cluster in like a minute and check. It would help out a lot of people who have done the swap and want to get rid of the abs light without tape or removing the bulb.
Thanks
I cant find anyone with a manual to help me find it, but anyone with a 03-05 ex w/ abs can just pull out the cluster in like a minute and check. It would help out a lot of people who have done the swap and want to get rid of the abs light without tape or removing the bulb.
Thanks
#131
Registered!!
Join Date: Apr 2005
Age: 42
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Could you please send me the schematics at remigijus01@gmail.com
#134
Registered!!
iTrader: (12)
Join Date: Sep 2003
Location: Canada, Hamilton, Ontario
Age: 40
Posts: 2,086
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 0 yes it is, but its the first time that I saw this thread, esp. with the wires and their colors explained. I already saw those diagrams that you posted gearbox, didnt help me as much. I will be needing your advice once exams are over....lol.
#135
#137
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 not too hard. just gotta unplug the battery, take out the cluster, then on each connector there are two locking tabs that need to be pried off the sides. then you can take out the wires with pliars or a pin removal tool. then they can be pushed back in the right spots.
there are two styles of gauge cluster. Old style is the 01-02 lx/ex and 01-05 dx/vp. New style is 03-05 lx/ex. so when you swap old sytle with new style, the same diagram applies. on the diagram, ex is the new, and vp is the old.
there are two styles of gauge cluster. Old style is the 01-02 lx/ex and 01-05 dx/vp. New style is 03-05 lx/ex. so when you swap old sytle with new style, the same diagram applies. on the diagram, ex is the new, and vp is the old.
#138
'04 VP Cluster
After reading this whole thread I'm still a little confused. I have an '04 VP and basically just want to add a factory tach to my car. Would I be better off with an LX or EX cluster? Are they both the same? I'm not really too concerned with looks. Thanks in advance for any info.
#139
01-02 ex to 03 dx
i have an 01-02 ex cluster.. will that be a direct swap into an 03 dx? thanks for any help. I will be doing it today.. so if i dont get a reply i will let everyone know..
#140
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 yup. 01-02 lx/ex will directly swap with any year dx. if you want the led 03-05 lx/ex cluster, thats what this diy here is for to rewire the pins.
#142
girlfriends 05 civic manual tranny. would like to put a cluster in for her that has the tach. would i need to rewire anything if i get a 05 ex/lx cluster.
yayitsnelson@gmail.com
just in case i need the diagram can someone email it to me. thanks
yayitsnelson@gmail.com
just in case i need the diagram can someone email it to me. thanks
#143
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 she has a DX. you can directly swap any 01-02 lx/ex cluster with tach. if you want the new led style 03-05 lx/ex, you need to rewire like in this thread. the diagrams should be posted a few pages back.
#145
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 you need to rewire it. 01-05 vp/dx is all the same old style cluster. you can only directly swap 01-02 lx/ex cluster into yours without rewiring.
#146
I want o do this, send me a copy please
skacoreny252hotmail.com
I want o do this, send me a copy please
skacoreny25hotmail.com
skacoreny252hotmail.com
I want o do this, send me a copy please
skacoreny25hotmail.com
Last edited by ESK1k20A2; 06-20-2006 at 02:18 PM. Reason: Automerged Doublepost
#148
Registered!!
iTrader: (1)
Join Date: Nov 2005
Location: Miramar, Florida
Age: 35
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 227 time to resurect this thread cuz im in deep SH*# !!! Gearbox or anyone who has done this i was doing my swap, but found that the wires were a bit hard to pull out. I already released the locks on the sides so then i attempted to pul lthem out but then SNAP!!! wire popped of and the pin connector is still in side.... danmit danmit danmit!! HELP HELP HELP!!!
#149
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 that happened to me on a few but stripped the wire. they sell pin poppers at a computer store to push them up from the bottom. you could try a paperclip but i could never get it to work.