99dxneverstress

anyone know of one? or any tips searched around through the threads didnt find anything.

Zeferint

iTrader: (2)

boilermaker made one for the 7th gens. it's very similar to the 6th gens and the thread is there for you to ask your questions and get the help and guidance you need.

link: https://www.civicforums.com/forums/4...elled-out.html

99dxneverstress

much appreciated bro i'll take a look

redhulksmash

There is a company called Scarebird that makes a bracket to do the disc conversion without swapping the control arms

then I went with rear brake components off of a 99-00 Si

need:
scarebird bracket
calipers
caliper bracket
pads
rotors
brakes hoses
e brake cables
proportioning block ( not completely needed, brakes will still favor the front though)
new spindle nuts

You could also go with brake setup off an integra or other 6th gen civic with disc brakes

CanadianCivic02

Do it properly and take your time, if bolts break buy oem bolts from honda not some hardware store. I see too many people locally doing this swap and having break failure while driving.

Rear disk FTW!

Zeferint

iTrader: (2)

control arms...? I think you mean trailing arms? Also, without replacing the proportioning valve, the brakes will actually favor the rear because more pressure is required to squeeze the drums than the calipers. More rear brake bias can be very dangerous, and it's best if you get a 40/40 prop valve.