bypassing the catalytic converter
#1
Registered!!
Thread Starter
Join Date: Mar 2011
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 bypassing the catalytic converter
is bypassing the cat a good idea ? what's the horesepower gain of doing this ? can one run a valve controlled pipe in parallel to the cat without removing the cat ? so when the valve is open the back pressure is reduced and when the valve is closed everything goes through the cat. Any insights on this subject
#2
Busy Speeding!!
Join Date: Nov 2010
Location: Wisconsin
Age: 30
Posts: 581
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 169 Re: bypassing the catalytic converter
The point of going without a cat is to reduce back pressure. It sounds like a good idea, but the air flow going from the headers to about after the flex pipe is the most important in reducing backpressure. the turns the exhaust has to take to bypass the cat would cause back pressure. the y pipe that you would fit in there would also caust back pressure no matter which path you have open because its not smooth.
Personally, I would weld in an lx downpipe with no cat, and then make the cat on the bypass pipe. a lot of work, but you could have an electronic switch when you get to a certain rpm so you could have good tq at low end and hp at high end. plus youd fool the emissions people XD
Personally, I would weld in an lx downpipe with no cat, and then make the cat on the bypass pipe. a lot of work, but you could have an electronic switch when you get to a certain rpm so you could have good tq at low end and hp at high end. plus youd fool the emissions people XD
#4
Live for the Twisties
Administrator
Join Date: Jun 2010
Location: Langley, BC
Posts: 8,580
Likes: 0
Received 5 Likes
on
5 Posts
Rep Power: 260 Re: bypassing the catalytic converter
somewhere between 0.1 and 0.2 horse power gain on an otherwise stock engine, with an increase in emissions several fold.
#6
Registered!!
Join Date: May 2010
Location: Funkytown, Tx
Posts: 3,662
Likes: 0
Received 2 Likes
on
2 Posts
Rep Power: 210 Re: bypassing the catalytic converter
1. Get an actuated valve. They start at about $60 and they look like this:
2. Have the muffler shop weld it in the straight portion of the pipe in front of the cat. Should cost $50-100
3. Wire it to a switch for the emissions test and those pesky officers.
2. Have the muffler shop weld it in the straight portion of the pipe in front of the cat. Should cost $50-100
3. Wire it to a switch for the emissions test and those pesky officers.
Last edited by lazlong; 11-27-2011 at 12:09 AM.
#7
Registered!!
Join Date: Jun 2011
Location: Dayton, Ohio
Posts: 710
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 164 Re: bypassing the catalytic converter
most shops wont weld that in there...becasue "they can be fined" for bypassing it.
however good find. i didnt know such a thing existed, but still theres really no point becasue you wont feel any gain at all and would just be smoggin it up. now with headers and thicker pipes...maybe
however good find. i didnt know such a thing existed, but still theres really no point becasue you wont feel any gain at all and would just be smoggin it up. now with headers and thicker pipes...maybe
#9
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 Re: bypassing the catalytic converter
better bet if youre worried about air flow is a muffler with valve that opens and closes depnding on how much exhaust is being pushed (based on engine rpm) like the rsx type-s jdm exhaust.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
h4ldol
7th Generation Civic 2001 - 2005
5
04-24-2017 08:16 PM
pilebuck13
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
09-21-2015 10:45 PM
Touge
Canada East
0
09-18-2015 12:13 AM