Forced Induction and SwapsPost information/questions about Forced Induction methods (Turbos & Nitrous Oxide) and swaps here.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
ok, i have looked around and not really seen an answer. what is max boost on stock fuel? i saw 5psi in another thread. Also the turbo i have has an internal wastegate set at 7 psi. so i need at least that, could i just put another injector in or get 6th gen Si injectors or new, bigger ones? any suggestions would be great, thanks.
nate
To remove this ad, register today for free or log in if already registered!
__________________ 01 ex 5-speed. injen intake, dc header, custom cat-back. stage 1 clutch, fake HID's 17 in MR7's w/ kuhmo 712's 15.5@90mph
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
I hooked up my Injector dutie cycle meter and went all the way to redline in 4th. It was around 80 percent. So I don't know how much more you can pull out of the stock ones. I wouldn't think you'd want to stress them past 90% because they wont last as long. Am I thinking correctly???
Well I have a light for every 10 percent, and the 80 percnt light was lit up. I remember reading somewhere that either 80 or 85 percent is the standard for cars so that sounds about right.
I heard that if you get an RSX fuel pump and injectors, you can run 5psi MAX. But you run rich all the time, which bogs down your engine when you arent in boost.
