Go Back   Honda Civic Forum > Honda Civics by Generation > 7th Gen Honda Civic > Forced Induction and Swaps

Forced Induction and Swaps Post information/questions about Forced Induction methods (Turbos & Nitrous Oxide) and swaps here.

Welcome to civicforums.com!
Welcome to civicforums.com.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!



Reply
 
LinkBack Thread Tools
Old 02-28-2009   #1 (permalink)
01_CiViC_CoUpE
New Member
 
Join Date: Feb 2009
Location: Lebanon TN
Age: 20
Posts: 46
iTrader: (0)
01_CiViC_CoUpE is an unknown quantity at this point
D17a2 Zet Kit Help

I have just hooked up my zex wet kit. when i got my jets i got a 75 shot by mistake i was just going to run a 55 shot but i wanted to see if anyone has been running a 75 shot with any problems. heres my setup

4-1 header
2.25 exhaust with cleaned out cat
aem sri
VAFCII
To remove this ad, register today for free or log in if already registered!
01_CiViC_CoUpE is offline   Reply With Quote
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com

By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
Old 02-28-2009   #2 (permalink)
bomerman19
Super Member
 
bomerman19's Avatar
 
Join Date: Apr 2006
Location: nova & richmond VA
Age: 25
Posts: 716
iTrader: (1)
bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned
Re: D17a2 Zet Kit Help

last person to run A 75 shot was I believe djmota. but he is running k-pro and a stage 2 cam.
bomerman19 is offline   Reply With Quote
Old 02-28-2009   #3 (permalink)
nyte_rider
Member
 
nyte_rider's Avatar
 
Join Date: Apr 2006
Age: 20
Posts: 79
iTrader: (2)
nyte_rider is an unknown quantity at this point
Re: D17a2 Zet Kit Help

I've been running a 75 shot with a nitrous express kit for while with no problems other than my clutch went out which I expected from all the extra torque and the car had 110,000 miles with the original clutch. What the miliage on your motor. More than likely you'll be fine with the 75. I really recomend a window switch because the rpms really go up fast and more than likely you'll hit the fuel cutoff which will be dangerous.

My mods are:
nx 75 shot
aem v2 intake
dc 4-2-1 race header
greddy evo2 catback
apexi neo untuned
competition stage 3 clutch
nyte_rider is offline   Reply With Quote
Old 03-01-2009   #4 (permalink)
01_CiViC_CoUpE
New Member
 
Join Date: Feb 2009
Location: Lebanon TN
Age: 20
Posts: 46
iTrader: (0)
01_CiViC_CoUpE is an unknown quantity at this point
Re: D17a2 Zet Kit Help

i have like 117,000 miles on it. i sprayed it like twice and checked my plugs they look alright. like a light brownish black color... i think thats ok maybe a lil rich. but i might just move down to a 55 shot just to be safe. when does the fuel cuttoff usually kick in??
01_CiViC_CoUpE is offline   Reply With Quote
Old 03-01-2009   #5 (permalink)
bomerman19
Super Member
 
bomerman19's Avatar
 
Join Date: Apr 2006
Location: nova & richmond VA
Age: 25
Posts: 716
iTrader: (1)
bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned bomerman19 should not be questioned
Re: D17a2 Zet Kit Help

^At the red line
bomerman19 is offline   Reply With Quote
Old 03-01-2009   #6 (permalink)
01_CiViC_CoUpE
New Member
 
Join Date: Feb 2009
Location: Lebanon TN
Age: 20
Posts: 46
iTrader: (0)
01_CiViC_CoUpE is an unknown quantity at this point
Re: D17a2 Zet Kit Help

ok thought it was but i wanted to ask and make sure
01_CiViC_CoUpE is offline   Reply With Quote
Old 03-01-2009   #7 (permalink)
01_CiViC_CoUpE
New Member
 
Join Date: Feb 2009
Location: Lebanon TN
Age: 20
Posts: 46
iTrader: (0)
01_CiViC_CoUpE is an unknown quantity at this point
Re: D17a2 Zet Kit Help

Quote:
Originally Posted by nyte_rider View Post
I've been running a 75 shot with a nitrous express kit for while with no problems other than my clutch went out which I expected from all the extra torque and the car had 110,000 miles with the original clutch. What the miliage on your motor. More than likely you'll be fine with the 75. I really recomend a window switch because the rpms really go up fast and more than likely you'll hit the fuel cutoff which will be dangerous.

My mods are:
nx 75 shot
aem v2 intake
dc 4-2-1 race header
greddy evo2 catback
apexi neo untuned
competition stage 3 clutch

thanks man.. ur car is super clean by the way
01_CiViC_CoUpE is offline   Reply With Quote
Old 03-02-2009   #8 (permalink)
nyte_rider
Member
 
nyte_rider's Avatar
 
Join Date: Apr 2006
Age: 20
Posts: 79
iTrader: (2)
nyte_rider is an unknown quantity at this point
Re: D17a2 Zet Kit Help

thanks, did you change your plugs to colder ones I think I'm running NGK Vpower brk7e something like that just make sure there not platinum plugs. Are you running a bottle heater because that could be another reason your running rich. The bottle should be somewhere around 950psi if you don't have enough nitrous pressure you'll run rich. I personally, I would just keep running the 75 shot if you just run it every now and then and at the track I really don't think you have anything to worry about.
nyte_rider is offline   Reply With Quote
Old 03-02-2009   #9 (permalink)
nyte_rider
Member
 
nyte_rider's Avatar
 
Join Date: Apr 2006
Age: 20
Posts: 79
iTrader: (2)
nyte_rider is an unknown quantity at this point
Re: D17a2 Zet Kit Help

Also if you don't have a window switch you should really think about investing in one, because if you take it to the track and don't have slicks and spray in 1st I can almost guarantee you'll hit the fuel cutoff, and even if you don't take it to the track its not a bad idea to get one.
nyte_rider is offline   Reply With Quote
Old 03-02-2009   #10 (permalink)
01_CiViC_CoUpE
New Member
 
Join Date: Feb 2009
Location: Lebanon TN
Age: 20
Posts: 46
iTrader: (0)
01_CiViC_CoUpE is an unknown quantity at this point
Re: D17a2 Zet Kit Help

ya i changed my plugs i think there ngk bke6r-11 or sumthin. when i was sprayin i think the pressur was like at 800. i just told myself that im not sprayin in 1st cause its not worth it to blow my shit at the cuttoff. ima keep sprayin at 3500+ in 2,3,and4 its quik and safe enough for me a couple tenths arnt that big of a deal, my motor is what icare about. but i didnt even think of my plugs being platnim or not thanks for bringin that up cause they might be ima change them to some copper ones if they are. thanks for your help tho man
01_CiViC_CoUpE is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


  
User Login
Our Partners
used new



Top 10 Threads
Dezod Motorsports Turbo Kit! Now Shipping!! VIDS ON 979 & Pics, DYNO on POST 1330
The 7thGen Swap FAQ.
DIY: K20/K24 into 2001+ Civic **Updated 4/20/2008**
DIY -- Installing SF Turbo kit
The 7thGen Nitrous FAQ.
*Updated SF Turbo Kits Page (aka. kits ready to ship)
Project "Super 7" *Supercharging K20* Update pg 20! Update.
Poll: D17 Stuff **future boosters, please enter**
K20z1 Swap/Turbo in process.
It has arrived !!!

Site Supporters


aluminum radiator

Honda car spoilers


All times are GMT -5. The time now is 08:21 PM.

   
Advertising - Privacy Policy - Terms of Use - Jobs
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0
All Content Copyright © 2007 CivicForums.com