Forced Induction and SwapsPost information/questions about Forced Induction methods (Turbos & Nitrous Oxide) and swaps here.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
I plan on installing ac with my swap (k24 frank). I bought a k24 compressor but at some point the clutch pulley was damaged beyond repair. I recently bought another compressor that was advertised as a k24 piece but actually is a k20 compressor. I have ep3 ac lines. I do not have the compressor mounting bracket. What I need to know is if the k20 compressor and bracket mount to the k24 block without modification. I realized today that the ep3 lines don't look like they will mate with the k24 compressor. The pulleys have different diameters but use the same width belt. Made me think that I should have bought the k20 compressor to begin with. So, will it work.
To remove this ad, register today for free or log in if already registered!
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
