Forced Induction and SwapsPost information/questions about Forced Induction methods (Turbos & Nitrous Oxide) and swaps here.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
FYI, i hope your not planning ont TRYING To attempt to put a K20 head on the K24a4 every where that i have read on different forums said thats the only engine you cant put a k20 head on.
To remove this ad, register today for free or log in if already registered!
__________________ Yeah so im kind of here but im kind of not... Im only here to post my opinions.
K20A swap, Jackson Racing SC, JRRH
277whp w/210ft.tq.
13.50@107.20 mph w/2.2 60ft time <Street tires>
12.92@106.30 mph w/2.1 60ft time <Slicks>
well... i had/still have the chanc to get a K20a2 block, engine with tranny for like $500. only problem, needs intake mani... i held of for a few months now, i want it but i dont want to go through the hassle of getting all the parts, but i think itll be cheaper to get a full clip, since i got an Auto and all... so what your 2 cents??? should i get it and get the parts and Frank it, or get it, and turbo it?!
__________________
I ♥ MY Honda
Enkei RPF1 Type 1 Racing SPL exhaust TEIN Hood Damper Cusco front strut bar
FUNCTION7 LCA
FYI, i hope your not planning ont TRYING To attempt to put a K20 head on the K24a4 every where that i have read on different forums said thats the only engine you cant put a k20 head on.
It fits, you just need to have aftermarket or TSX, or CRV pistons. The accord pistons will hit the valves of the k20 head.
__________________ B18C1 Powered 1992 Honda Civic Si
It fits, you just need to have aftermarket or TSX, or CRV pistons. The accord pistons will hit the valves of the k20 head.
yeah i knew about that, but wasnt there also something to do with the oil something lol *cant think of the name.* like a passage not being there or sometihng.
__________________ Yeah so im kind of here but im kind of not... Im only here to post my opinions.
K20A swap, Jackson Racing SC, JRRH
277whp w/210ft.tq.
13.50@107.20 mph w/2.2 60ft time <Street tires>
12.92@106.30 mph w/2.1 60ft time <Slicks>
FYI, i hope your not planning ont TRYING To attempt to put a K20 head on the K24a4 every where that i have read on different forums said thats the only engine you cant put a k20 head on.
Oh hell no bro I did alot of research on the k24's all of them and what works and what wont. I pulled the pistons and rods crank stripped her bare.... im going 13.5:1 Custom JE Pistons with some IB K24 I Rods. Then a Type S head with IPS k2 cams, and a quaife LSD 6-speed Tranny...
hey honda luver will the EP3 axles fit the frank swaps?
Good job on all that research man! the only way i learned was lots of readings and thread searching. and alot of trial and error. usually the only reason i will help people now is if they can prove that they atleast tried to search for their answer and got nothing. hit me up if you need any help.
the ep3 axles willl work perfectly. are you going to run this on pump gas? or is this a track car?
__________________ 01 SSM em2 k24 hybrid
06 Red CBR600RR
Status:
01 SSM em2 built k24bar'd NA tune(till turbo time)...240.7 hp and 190.9 tq
Good job on all that research man! the only way i learned was lots of readings and thread searching. and alot of trial and error. usually the only reason i will help people now is if they can prove that they atleast tried to search for their answer and got nothing. hit me up if you need any help.
the ep3 axles willl work perfectly. are you going to run this on pump gas? or is this a track car?
Thanks for the help bro I will keep you updated on my build up.
