K24 Frank begins.

[streetthrowback]

Originally Posted by xproductionz weird.. the only sensor i changed was the crank sensor... everything else i left the same where is the crank sensor located?

To remove this ad, register today for free or log in if already registered!

[streetthrowback]

in http://www.k20a.org/forum/showthread.php?t=21854 the cr-v crank sensor is the same as the rsx-s

[RAZRBLD]

I should have the beast on the road in 2-3 weeks!!

[DsevenEm2]

pics man...we wana see the progress not read it!! LOL good job by the way

u still sticking with the NA IS BEST! concept?

[RAZRBLD]

you know it.... broke my digiAL camera... no good... but im trying to buy another camera. partyin in vegas right now...LOL

[streetthrowback]

are you going to use the stock a/c compressor from the em2??

[xproductionz]

ac/ compressor or condensor?? cause u asked me condensor not the compressor

[BigD001]

I have a question when using a k20a3 or k20a2 tranny with a k24 motor do you have to have the gear ratio changed? cause I know that they have slightly deffrent specs.

[streetthrowback]

sorry i meant a/c compresser

[xproductionz]

Originally Posted by BigD001

I have a question when using a k20a3 or k20a2 tranny with a k24 motor do you have to have the gear ratio changed? cause I know that they have slightly deffrent specs.

kpro has the option but you dont have to.. when kpro first came out it never had the option but now it does...

its more for kpro to help determine what gear you are in by using the math of speed vs rpm calculation... usually when using options in kpro that needs to determine what gear you are in... examples would be the boost by gear option

[White0nGold]

hey i just read the first page of this thread havnt gone through it all, but u said u got a k24a4 motor and ur gonna have valve clearence issues or so hondaluver said, isnt the k24a4 the element motor? not accord

[BigD001]

Thanks xproductionz I didn't know the new version kpro did all that. I'm trying to learn evrythong before I buy my k24 in a couple of weeks

[xproductionz]

Originally Posted by White0nGold

hey i just read the first page of this thread havnt gone through it all, but u said u got a k24a4 motor and ur gonna have valve clearence issues or so hondaluver said, isnt the k24a4 the element motor? not accord

he is building the motor

[RAZRBLD]

Originally Posted by xproductionz

he is building the motor

X2

I built the Motor using aftermarket pistons and connecting rods... So no valve to piston clearance issues.

[Mr_Plenty]

alot of good information in this thread...